Author Topic: Hello Beautiful people  (Read 2221 times)

Offline kalisana

  • Verified/Junior
  • **
  • Posts: 10
Hello Beautiful people
« on: November 03, 2017, 04:39:38 AM »
Hello, I am new here and I found this site interesting and very useful. I want to join this forum so that I may help people out with my expertise and printing ideas. I also intend to learn from others. My area of expertise is printing especially t-shirts and garments in general.


Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6056
Re: Hello Beautiful people
« Reply #1 on: November 03, 2017, 08:25:05 AM »
Not that I would consider myself one of the beautiful people, but welcome aboard. There are a lot of good, creative, knowledgeable folks here who share info freely.

Steve
I made a mistake once; I thought I was wrong about something; I wasn't

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Hello Beautiful people
« Reply #2 on: November 03, 2017, 08:51:09 AM »
Welcome. You're coming from the DTG side of the industry, right?
That rug really tied the room together, did it not?

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5333
Re: Hello Beautiful people
« Reply #3 on: November 03, 2017, 09:45:34 AM »
Steve might not be one of the beautiful people here, but I am  ;D welcome and I look forward to read your post.

darryl
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6056
Re: Hello Beautiful people
« Reply #4 on: November 03, 2017, 12:42:08 PM »
Steve might not be one of the beautiful people here, but I am  ;D welcome and I look forward to read your post.

darryl

Well, yeah... ;D

Steve
I made a mistake once; I thought I was wrong about something; I wasn't

Offline kalisana

  • Verified/Junior
  • **
  • Posts: 10
Re: Hello Beautiful people
« Reply #5 on: November 10, 2017, 03:54:54 PM »
Welcome. You're coming from the DTG side of the industry, right?

Yes, you are right. I'm coming from the DTG side of the industry.