Computers and Software > RIPs

T-Rip and Epson 3000

<< < (2/2)

Get Shirts:
Could it be a orientation setting that is being overlooked?


Sent from my iPhone using Tapatalk

3Deep:
The 3000 has a memory that gets stuck your going to have to clear the printer, I've had it happen where it got stuck on a page size, run a black print through without the rip at the size you need.

Squeegie:
Page orientation is correct.

3Deep has the correct info, in that the 3000 has a memory sticking issue. 
I had already solved the issue before posting the question. I was seeing if anyone else knew a fix and the info would be here for people searching with the same or similar issue.

The solution for me was as simple as it gets.  It did however take me over 2 hours of messing with it to figure it out.  Sometimes it is the simplest of things we overlook. 
Much like any computer and networking issues I help troubleshoot for others...always, always, always, do a clean start.  Unplug the device that is giving you trouble, hit the power button to dissipate any residual power hanging on to the capacitors or memory chips.  Then plug the device back in and start as normal.

So, I had used the power button to shut down the printer and turn it back on.  I had rebooted the computer multiple times, including the clean start method...but I neglected to do the same on the printer.

Once I did the clean start on the printer, it printed as expected.

Thanks to those that offered help.

Navigation

[0] Message Index

[*] Previous page