Author Topic: need help with a logo  (Read 4597 times)

Offline screenxpress

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2434
Re: need help with a logo
« Reply #15 on: November 21, 2011, 12:17:37 AM »
I showed Jason basically how to do a re-trace using the Bezier tool to drop nodes and the Shape Tool to manipulate the node points and shapes.

The tattoo image was a number of re-traced sub-objects for the various ribbon parts as line art.  Then the ones from the left to the middle were Combined and a Fountain Fill applied from Pantone Turquoise to White.  Then the "pieces" from the middle to the right were "Combined" and a Fountain Fill of White to Pantone Pink as the requirement was to go from Turquoise to White to Pink. 

I would not be the least bit surprised if there's not another or even better way to do it. 

I'm certainly not a Corel Guru by a long shot.  But I usually stumble through enough to get the job done, thanks to Diane (CYW) for the tips to get me started a few years back. 

I'm always learning at this stuff and thanks to you guys for posting your problems (?) so I can see if I can do what is being asked for myself. 

Anything important is never left to the vote of the people. We only get to vote on some man; we never get to vote on what he is to do.  Will Rogers


Offline Printhouse

  • Sr. Member
  • ****
  • Posts: 305
Re: need help with a logo
« Reply #16 on: November 21, 2011, 01:49:15 AM »
very nice explanation.  It is always nice to learn ways of doing things.  That is one of the best things about this forum.

Offline Dottonedan

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 5907
  • Email me at art@designsbydottone.com
Re: need help with a logo
« Reply #17 on: November 21, 2011, 11:16:31 AM »
I had this to be given away in the free art section.  Killer Graphics was the only one that took me up on it so far.

It's a layered file in photoshop.





http://www.theshirtboard.com/index.php?topic=268.0
Artist & high end separator, Owner of The Vinyl Hub, Owner of Dot-Tone-Designs, Past M&R Digital tech installer for I-Image machines. Over 35 yrs in the apparel industry. e-mail art@designsbydottone.com

Offline Fluid

  • !!!
  • Sr. Member
  • ****
  • Posts: 462
  • Keep the Ink Moving... Stay Corelian My Friends!
Re: need help with a logo
« Reply #18 on: November 21, 2011, 03:32:33 PM »
I think screenxpress' way of using the bezier tool or freehand tool is the best and easiest as well as fastest way of recreating that logo.   Actually a fairly simple logo to recreate and once you get one of the ribbons created it is just duplicating and doing a little above and under action to get that interlocking look. Then just using a gradient blen for the colors across all the ribbons and bam.

For an experienced Corel user, your talking about 10-15 min tops to recreate the graphic portion of that logo
Richard
--Fluid       www.fluiddsn.com Graphic Designs, Color Separations & Film Output 15+ years Industry Experience - CorelDRAW MasterĀ® 

Offline sportsshoppe

  • !!!
  • Hero Member
  • *****
  • Posts: 649
  • A way of life.
Re: need help with a logo
« Reply #19 on: November 30, 2011, 01:24:17 PM »
I sure do miss Diane.... has anyone heard from her? The ultimate Guru on Corel..

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: need help with a logo
« Reply #20 on: November 30, 2011, 01:32:29 PM »
I sure do miss Diane.... has anyone heard from her? The ultimate Guru on Corel..


oooh Richard, that must hurt! lol! "Ultimate" leaves no wiggle room, I'll guess we'll just have to settle for "really great" as long as Diane is busy with her new toy, a Versacamm.
She visits, contributes, but not enough to satisfy CorelDRAW learners, and those of us with a crush on her.

(that last comment may be good enough to get her here for a while, but with the Versacamm, being so perfect for one off Christmas gifts maybe not, but here's hoping!)
That rug really tied the room together, did it not?

Offline sportsshoppe

  • !!!
  • Hero Member
  • *****
  • Posts: 649
  • A way of life.
Re: need help with a logo
« Reply #21 on: November 30, 2011, 01:38:31 PM »
no harm meant to Richard, he is also very good.... just miss Diane

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: need help with a logo
« Reply #22 on: November 30, 2011, 01:42:56 PM »
Hey, I'm sure that none was taken as Richard also loves Diane. He is "The Man" though, and don't forget it!

That rug really tied the room together, did it not?

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5323
Re: need help with a logo
« Reply #23 on: November 30, 2011, 02:32:07 PM »
Frog I see you still got that lump in your throat for Diane LOL  Yep pretty simple art to retrace..if your not sure about retracing with bezier tool, print the art and lay on a light table and pencil it then ink and scan to a tiff to vector it, I know I skipped something here.

Darryl
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!

Offline JayzTeez

  • !!!
  • Sr. Member
  • ****
  • Posts: 373
  • Manual Screen Printer
Re: need help with a logo
« Reply #24 on: December 01, 2011, 11:21:10 AM »
finished shirts. 
Jayz Teez Screen Printing
Houtzdale, PA.

Offline theMadArtist

  • Sr. Member
  • ****
  • Posts: 353
  • Creativity Makes the Difference!
Re: need help with a logo
« Reply #25 on: December 06, 2011, 06:52:13 PM »
Just joined, Jayz; I assume you got-er-done?
Custom Art done FAST! And within your Budget...
theMadArtist.org
(253)652-4443

themadartist@live.com

Offline JayzTeez

  • !!!
  • Sr. Member
  • ****
  • Posts: 373
  • Manual Screen Printer
Re: need help with a logo
« Reply #26 on: December 06, 2011, 07:16:07 PM »
yeah i did the finished shirt was posted above.  thanks and Welcome to the board.
Jayz Teez Screen Printing
Houtzdale, PA.

Offline theMadArtist

  • Sr. Member
  • ****
  • Posts: 353
  • Creativity Makes the Difference!
Re: need help with a logo
« Reply #27 on: December 06, 2011, 08:00:23 PM »
Gracias!
Custom Art done FAST! And within your Budget...
theMadArtist.org
(253)652-4443

themadartist@live.com

Offline Fluid

  • !!!
  • Sr. Member
  • ****
  • Posts: 462
  • Keep the Ink Moving... Stay Corelian My Friends!
Re: need help with a logo
« Reply #28 on: December 08, 2011, 02:01:03 PM »
Nice job and yes no worries. I miss the hippie gurl as well.  We cross paths every now and then on various forums and in beta sessions.  Diane knows her stuff thats for sure.  I believe her focus went to Corel and Embroidery though. Not sure as it has been a while.

Richard
--Fluid       www.fluiddsn.com Graphic Designs, Color Separations & Film Output 15+ years Industry Experience - CorelDRAW MasterĀ®