screen printing > 4 Color and Simulated Process Printing
New Army T
Dottonedan:
--- Quote from: sportsshoppe on May 09, 2011, 01:37:12 PM ---Dan I would like to print more wet on wet but have a problem with popping even with silicone spray.... What mesh count art they using to print that many colors without conflict of the popping or ink build up... Thanks for any advice.
--- End quote ---
300 mesh typically. Some 350 mesh and also down to 230's. All at work hardened high tension mesh on newman roller frames.
Donnie:
I always print with at least 305s on the top colors. Finding the right mix of squeegee pressure and print speed is often a delicate dance. I can usually tweak it to not have to flash but on some jobs...there is no other way but to flash.
Dottonedan:
--- Quote from: Donnie on May 09, 2011, 10:48:48 PM ---I always print with at least 305s on the top colors. Finding the right mix of squeegee pressure and print speed is often a delicate dance. I can usually tweak it to not have to flash but on some jobs...there is no other way but to flash.
--- End quote ---
I had to laugh today on the phone at your Donnie-ism's. I hear them from you all the time, but the "light as a popcorn fart" was over the top. LOL.
Navigation
[0] Message Index
[*] Previous page
Go to full version