General > Action Engineering

Moving on - another Yay or Nay

(1/6) > >>

Action1:
You guys are great for assisting with your valuable input. Thank you very much.. Please help with another 'Yay or Nay'

Here's one that we've been requested to do on numerous occasions. Our latest new machinery enables us to develop these ideas when we couldn't do so easily before.
This is a Screen Divider. You have a screen with two images burned on it. This lets you create a dam so the ink won't get to the back stencil. Where as previously you would have masked off the back stencil, now you don't. This also brings forward the resting position for the squeegee which make's it much more back friendly. You'll be printing quicker and easier.

Colin:
Not a bad idea...

I can see it for manual presses with back clamps only.  Maybe offer a special with Ryonet.

If you have side clamps on your manual press, bungie cords are quicker and cheaper to run across.

1964GN:
We use tape to do this. It's fast and cheap.

Sbrem:
I did something like this many years ago, but so I could print 2 colors from the same screen (the art allowed for it). Otherwise, I'd tape...

Steve

Hey Monkey:
I am always down for stuff like this. Sure we can make, tape etc. but this kind of stuff move the needle forward in my mind. I would be game to try it out as I do a ton of double image burns. Couple that with all manual, back clamp only...

Navigation

[0] Message Index

[#] Next page