« previous next »
Pages: 1 [2]   Go Down

Author Topic: 1st try at halftone  (Read 6488 times)

Offline stitches4815

  • !!!
  • Hero Member
  • *****
  • Posts: 537
Re: 1st try at halftone
« Reply #15 on: January 09, 2012, 10:46:48 AM »
Great Job!  I remember my first halftone job.  I was scared sh!tless.  The screen exposed and rinsed out nice.  Then when I printed it.............it turned out really awesome.  The customer was pleased.
Logged

Offline sweetts

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1768
  • Simplicity is the ultimate sophistication DUH
Re: 1st try at halftone
« Reply #16 on: January 10, 2012, 12:52:15 PM »
Pierre looked at for me and made some suggestions, I will play with it some more to dial it in and repost a better print thanks for all the help

Sent  from samsung gem(the worst smart phone ever)
Logged
RT Screen Designs
Willowick Ohio
www.rtscreendesigns.com

Offline Denis Kolar

  • Gonzo Member
  • ******
  • Posts: 2871
Re: 1st try at halftone
« Reply #17 on: January 10, 2012, 01:25:22 PM »
That's looking good. Which emulsion did you use, diazo, dual cure or Photopolymer?
Logged

Offline sweetts

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1768
  • Simplicity is the ultimate sophistication DUH
Re: 1st try at halftone
« Reply #18 on: January 10, 2012, 01:46:59 PM »
Udc hv diazo I tried the green stuff you gave me but it kept blowing out, I am going to play with it more maybe a longer burn will help

Sent  from samsung gem(the worst smart phone ever)
Logged
RT Screen Designs
Willowick Ohio
www.rtscreendesigns.com
Pages: 1 [2]   Go Up
« previous next »