General > Action Engineering
New Pallet design - Yay or Nay?
GraphicDisorder:
We print a ton of 3-4-5-6xl shirts, I just dont think this would help us. Just to be honest. I certainly wouldn't buy them then stop a run to flip them out.
Inkworks:
i.m.o. : If you have trouble loading big shirts, you need practice, or adjustments in your technique, not a trick pallet. That's like putting flying buttresses on your outhouse.
Lizard:
I my opinion longer pallets help more with alignment than wider.
Atownsend:
Nay on the expandable pallets for me, I like the concept, but the $$ could be better used for other things here. Probably the case with a lot of others as well. Loading the big shirts is trickier, but not that much trickier. I would worry about the extensions swinging out during indexing if there is no locking device.
Not to derail this, but a quality 3rd party pre reg system that does it right without carrier sheets / pins would probably be in high demand. Many of us have built or modded units out of necessity. Many of the DIY units folks have made here are just as good if not superior to what is on the market currently. There is a much bigger market for pre reg than for the expandable pallet I think.
Rockers:
--- Quote from: Atownsend on August 09, 2017, 09:50:54 PM ---Nay on the expandable pallets for me, I like the concept, but the $$ could be better used for other things here. Probably the case with a lot of others as well. Loading the big shirts is trickier, but not that much trickier. I would worry about the extensions swinging out during indexing if there is no locking device.
Not to derail this, but a quality 3rd party pre reg system that does it right without carrier sheets / pins would probably be in high demand. Many of us have built or modded units out of necessity. Many of the DIY units folks have made here are just as good if not superior to what is on the market currently. There is a much bigger market for pre reg than for the expandable pallet I think.
--- End quote ---
Word
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version