« previous next »
Pages: [1]   Go Down

Author Topic: Lawson LED 5000 exposure unit  (Read 1337 times)

Offline trebor

  • Full Member
  • ***
  • Posts: 133
Lawson LED 5000 exposure unit
« on: March 14, 2017, 11:21:29 AM »
I am finally crawling into the new millennium. I picked up my new Lawson LED exposure unit last week and I am loving it.

It has decreased my exposure times almost by half.

It is my first step towards going to CTS by mid year. Going to half to get used to new exposure times and tweaking those times. I have used exposure units varying from fluorescent bulbs to halogen light over the years so this is quite a luxury for us.
Logged

Offline Doug S

  • Gonzo Member
  • ******
  • Posts: 1482
Re: Lawson LED 5000 exposure unit
« Reply #1 on: March 14, 2017, 11:34:12 AM »
Congrats!  I've got the exact same unit.  I had to modify it for cts.  My go to is still the amerigraph 150 for halftone work though, especially for over 55 lpi.  If I had to do it again and they were available at the time, I would've chosen the starlight or ryonets led with the saati led bulb.
Logged
It's not a job if you love doing it.

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5683
Re: Lawson LED 5000 exposure unit
« Reply #2 on: March 14, 2017, 04:11:27 PM »
Our combination of emulsion with M&R I Image STE exposing=3 seconds
Logged

Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Re: Lawson LED 5000 exposure unit
« Reply #3 on: March 14, 2017, 04:31:25 PM »
Quote from: tonypep on March 14, 2017, 04:11:27 PM
Our combination of emulsion with M&R I Image STE exposing=3 seconds

Are you managing a plastisol shop Tony?!
Logged

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5683
Re: Lawson LED 5000 exposure unit
« Reply #4 on: March 14, 2017, 04:52:50 PM »
No. Post exposing any WB screens. Pretty much print anything on anything
Logged
Pages: [1]   Go Up
« previous next »