« previous next »
Pages: [1]   Go Down

Author Topic: squeegy Skipping  (Read 1388 times)

Offline Logoman

  • Sr. Member
  • ****
  • Posts: 394
  • Life is what happens while your making other plans
squeegy Skipping
« on: March 02, 2017, 10:25:29 PM »
trying to post video but too large I guess. Any suggestions?
Logged

Offline im_mcguire

  • !!!
  • Hero Member
  • *****
  • Posts: 716
Re: squeegy Skipping
« Reply #1 on: March 02, 2017, 11:05:07 PM »
upload to youtube, then share the link.
Logged

Offline Dottonedan

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 5907
  • Email me at art@designsbydottone.com
Re: squeegy Skipping
« Reply #2 on: March 02, 2017, 11:29:43 PM »
Yup. Gotta load via youtube and post link.
Logged
Artist & high end separator, Owner of The Vinyl Hub, Owner of Dot-Tone-Designs, Past M&R Digital tech installer for I-Image machines. Over 35 yrs in the apparel industry. e-mail art@designsbydottone.com

Offline Logoman

  • Sr. Member
  • ****
  • Posts: 394
  • Life is what happens while your making other plans
Re: squeegy Skipping
« Reply #3 on: March 03, 2017, 06:32:53 AM »
check out the video and if anyone has any suggestions of problem please reply. It does this on most jobs and can't figure out the problem. The only way I can get it to stop skipping is to speed up squeegee

https://youtu.be/QNIbQ8Q4wr4
« Last Edit: March 03, 2017, 06:35:24 AM by Logoman »
Logged

Offline TH Apparel

  • Verified/Junior
  • **
  • Posts: 93
Re: squeegy Skipping
« Reply #4 on: March 03, 2017, 07:11:12 AM »
we get it on occasion also.  Take a little pressure off and speeding up the squeegee seems to help.
Logged

Offline kingscreen

  • Gonzo Member
  • ******
  • Posts: 1161
Re: squeegy Skipping
« Reply #5 on: March 03, 2017, 08:55:20 AM »
Angle, Speed, Pressure.   Increase, increase, decrease.
Logged
Scott Garnett
King Screen

Offline bimmridder

  • Gonzo Member
  • ******
  • Posts: 1883
Re: squeegy Skipping
« Reply #6 on: March 03, 2017, 09:08:59 AM »
Add some ink? Get a good fill stroke?
Logged
Barth Gimble

Printing  (not well) for 35 years. Strong in licensed sports apparel. Plastisol printer. Located in Cedar Rapids, IA

Offline whitewater

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1830
Re: squeegy Skipping
« Reply #7 on: March 03, 2017, 09:35:47 AM »
you know i get that once in a while.. no idea why either. seems to happen on 230's us but no idea why and not all the time. only once in while
Logged

Offline Doug B

  • !!!
  • Hero Member
  • *****
  • Posts: 547
Re: squeegy Skipping
« Reply #8 on: March 03, 2017, 09:49:13 AM »
  Occasionally I will get it on a manual job but very rarely on the auto. Seems to me
to be mostly angle and pressure. I will only adjust angle on the auto if I'm trying to
print something larger than was meant to be.
Logged

Offline alan802

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3535
  • I like to screen print
Re: squeegy Skipping
« Reply #9 on: March 03, 2017, 10:10:27 AM »
That only happens here when we have a very thin ink, usually black, like Triangle Batman is the worst.
Logged
I would rather be exposed to the inconveniences attending too much liberty than to those attending too small a degree of it -T.J.
Those who expect to reap the blessings of freedom, must, like men, undergo the fatigues of supporting it -T.P.

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5326
Re: squeegy Skipping
« Reply #10 on: March 03, 2017, 11:19:52 AM »
After looking at the vid I tend to agree with Dave looks like you need to add some ink in there, at lease that's what I think I see anyway.
Logged
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!
Pages: [1]   Go Up
« previous next »