« previous next »
Pages: [1]   Go Down

Author Topic: Activator 2/17  (Read 1822 times)

Offline DCSP John

  • Sr. Member
  • ****
  • Posts: 340
Activator 2/17
« on: February 17, 2017, 02:37:37 PM »
Hi Everyone...

Question - is the CCI discharge activator the same as the Rutland discharge activator?
Running low on CCI, and I have plenty of the Rutland powder... Figured I would ask before
experimenting...

Thanks.  John
Logged

Offline ebscreen

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4281
Re: Activator 2/17
« Reply #1 on: February 17, 2017, 02:38:23 PM »
Yes.

We like CCI though as it's a finer grind and dissolves easier.

But otherwise, it's all the same.
Logged

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5683
Re: Activator 2/17
« Reply #2 on: February 17, 2017, 02:41:20 PM »
Zincformaldehydesulfoxilate and its technically in crystal form but yes all the same
Logged

Offline DCSP John

  • Sr. Member
  • ****
  • Posts: 340
Re: Activator 2/17
« Reply #3 on: February 17, 2017, 02:42:27 PM »
great to know. Thanks for the speedy reply.

John
Logged

Offline ebscreen

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4281
Re: Activator 2/17
« Reply #4 on: February 17, 2017, 02:43:41 PM »
Quote from: tonypep on February 17, 2017, 02:41:20 PM
Zincformaldehydesulfoxilate

I bet you didn't even have to look that up.
Logged

Offline Colin

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1610
  • Ink and Chemical Product Manager
Re: Activator 2/17
« Reply #5 on: February 17, 2017, 03:03:35 PM »
I didn't ;)
Logged
Been in the industry since 1996.  5+ years with QCM Inks.  Been a part of shops of all sizes and abilities both as a printer and as an Artist/separator.  I am now the Ink and Chemical Product Manager at Ryonet.

Offline RICK STEFANICK

  • Gonzo Member
  • ******
  • Posts: 1925
  • INDUSTRY CONSULTANT-OPERATIONS SPECIALIST
Re: Activator 2/17
« Reply #6 on: February 17, 2017, 03:25:51 PM »
Its all the same.  The Sericol is a really fine grind that we do use it with the process colors (I doubt it matters but use it anyways). We primarily use Rutland activator and now dissolve it in a small amount of water then pour it in. Its just another controllable process that eliminates issues if there is a issue.
Logged
Specializing in shop assessment's, flow and efficiency
Pages: [1]   Go Up
« previous next »