Nuarc 3140 Keypad Alignment

[scrubz]

Would anyone know if you can adjust the key pad on my Nuarc 3140?  When I need to press say a number 3, I have to go almost to the number under it and press that, to hit the 3 above...the same with every key on the control pad.  Is there a function to calibrate in the service area, and if so, I need a password.  Any help is appreciated.

[inkman996]

Ours was like that since the day we bought it new.

[Croft]

yep same here, you will get used to it

[scrubz]

Thanks for the input, I can live with it.

[KrisB]

Would anyone know if you can adjust the key pad on my Nuarc 3140?  When I need to press say a number 3, I have to go almost to the number under it and press that, to hit the 3 above...the same with every key on the control pad.  Is there a function to calibrate in the service area, and if so, I need a password.  Any help is appreciated.

Hello,
 Please call email me at parts@mrprint.com with the serial number of your machine and we will have the info for you.
Thank you,

[244]

Thanks for the input, I can live with it.

How old is the unit? Could you send me the serial number off of the HMI (display)?

[scrubz]

Kris, I sent you an email.
Rich, thanks for your reply, it looks like I need a password to access info on the control panel?
I purchased this unit used last year, is maybe 3 or 4yrs old.

[244]

Kris, I sent you an email.
Rich, thanks for your reply, it looks like I need a password to access info on the control panel?
I purchased this unit used last year, is maybe 3 or 4yrs old.

its 6 years old and according to the manufacturer of the HMI cannot be reconfigured.

[mt_signex]

Mine is the same way, as others have said you get used to it.  I did make some presets which help since you don't have to try to enter 3 digits each time.


Sent from my iPhone using Tapatalk