Author Topic: Cad Cut Transfer over plastisol print??  (Read 1251 times)

Offline im_mcguire

  • !!!
  • Hero Member
  • *****
  • Posts: 716
Cad Cut Transfer over plastisol print??
« on: January 24, 2017, 05:29:47 PM »
I have a client that owns a Taekwondo facility.  They wanted some gees screened.  I told them that they would be better off with a transfer, or embroidery, due to the fact that this is a multi color design on a black gee, with a white underbase.  I explained, when sparring inks could get damaged, and not look good very quickly. 

Customer doesnt want to spend the extra money for embroidery, or transfers. 

Ink from gee is now flaking off.

Can you put a transfer over a cured plastisol print, and will it hold?



Offline mimosatexas

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4221
  • contributor
Re: Cad Cut Transfer over plastisol print??
« Reply #1 on: January 24, 2017, 08:36:56 PM »
Nope. It won't adhere properly and you'll see the imperfections from the print as well.

Offline RICK STEFANICK

  • Gonzo Member
  • ******
  • Posts: 1925
  • INDUSTRY CONSULTANT-OPERATIONS SPECIALIST
Re: Cad Cut Transfer over plastisol print??
« Reply #2 on: January 25, 2017, 10:07:51 AM »
I have never had a issue with gee's. Is it possible you over flashed the base to cause the flaking? Just sayin in case you have to reprint.
Specializing in shop assessment's, flow and efficiency

Offline im_mcguire

  • !!!
  • Hero Member
  • *****
  • Posts: 716
Re: Cad Cut Transfer over plastisol print??
« Reply #3 on: January 25, 2017, 10:41:13 AM »
I have never had a issue with gee's. Is it possible you over flashed the base to cause the flaking? Just sayin in case you have to reprint.

This is the only thing I can think.  I printed shirts with the same design, and there is no issue with those...