Author Topic: Seeing just how lazy I can be...  (Read 2249 times)

Offline farmboygraphics

  • Hero Member
  • *****
  • Posts: 621
Seeing just how lazy I can be...
« on: January 04, 2017, 04:27:56 PM »
Stuck a green pad on one of our sanders and the rest is history :-)
https://youtu.be/QW3Huwh7wi4
Tees and Coffee


Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Re: Seeing just how lazy I can be...
« Reply #1 on: January 04, 2017, 04:29:43 PM »
hell. yes. 

Did it work as fast as doing it by hand?

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Re: Seeing just how lazy I can be...
« Reply #2 on: January 04, 2017, 05:05:36 PM »
We just spray and use a brush... I think we "stole" it from Mooseman who has a video showing it.

Other than kind of making a mess, it's done in seconds.

Offline GraphicDisorder

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5872
  • Bottom Feeder
Re: Seeing just how lazy I can be...
« Reply #3 on: January 04, 2017, 05:15:50 PM »
That looks slow lol. But less labor probably.
Brandt | Graphic Disorder | www.GraphicDisorder.com
@GraphicDisorder - Instagram | Facebook | Twitter | Youtube

Offline Admiral

  • Hero Member
  • *****
  • Posts: 891
Re: Seeing just how lazy I can be...
« Reply #4 on: January 04, 2017, 05:58:47 PM »
To those of you doing this (usually with a brush) - does it work on spray tack / web tack / fleece etc...

If so how often do you have to do it? every couple hours on a 10-14 pallet press?

We tried so many different ways to get the cleanest and quickest tack method but we use an air gun with TB-10 or the dreaded spray tacks (necessary with many of the garments we print).

Offline Itsa Little CrOoked

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1295
Re: Seeing just how lazy I can be...
« Reply #5 on: January 04, 2017, 06:04:12 PM »
hell. yes. 

Did it work as fast as doing it by hand?


Um......no.

I spend more time clearing the fuzz from my Scotchbrite pads than the actual defuzzing. I tried Professor Moosey's solution and didn't much care for it at the time. I must re-visit the video.

I'm currently using these, with a 1/4 sheet of Home Depot Scotchbrite Green Pads. They are reverse-able so they are real cheap to use. A stiff bristle brush like Mooseman uses for his defuzzing is what works the best to clean the pad.

And when they are fresh, they WILL clean a limited amount of Web Spray. But then, you really need to throw the pad away since cleaning Web Spray off of Scotchbrite Pads doesn't work too good.

« Last Edit: January 04, 2017, 06:08:36 PM by Itsa Little CrOoked »

Offline farmboygraphics

  • Hero Member
  • *****
  • Posts: 621
Re: Seeing just how lazy I can be...
« Reply #6 on: January 04, 2017, 09:16:19 PM »
hell. yes. 

Did it work as fast as doing it by hand?

Ya...not so much :-) but, more came off with less effort. I think I'll keep it for awhile. Was going to enlist the use of an old car buffer I have, but thought better of it. I used a stiff bristle brush for a long time, but I feel the green pads do a better job for me.
Tees and Coffee

Offline mooseman

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2215
Re: Seeing just how lazy I can be...
« Reply #7 on: January 05, 2017, 06:38:15 AM »
stiff brush and a little elbow grease
mooseman

https://www.youtube.com/watch?v=R1mMFmDvOPw
DUE TO CIRCUMSTANCES COMPLETELY WITHIN MY CONTROL YOU SHOULD GET YOUR OWN TEE SHIRT AND A SHARPIE MARKER BY NOON TOMORROW OR SIMPLY CALL SOMEONE WHO GIVES A SHIRT.

Offline K-BOB

  • Verified/Junior
  • **
  • Posts: 13
  • Don't look at me i'm just a screen printer...
Re: Seeing just how lazy I can be...
« Reply #8 on: January 05, 2017, 06:59:46 AM »
what about switching pallet tape? 
« Last Edit: January 05, 2017, 10:33:06 AM by K-BOB »
Don't look at me i'm just a screen printer...

Offline farmboygraphics

  • Hero Member
  • *****
  • Posts: 621
Re: Seeing just how lazy I can be...
« Reply #9 on: January 05, 2017, 08:24:33 AM »
what about witching pallet tape?

I looked, but I can't find the enchanted pallet tape anymore. Was pretty sweet how it would come clean with a wave of the wand. :-)
Tees and Coffee

Offline CBCB

  • !!!
  • Sr. Member
  • ****
  • Posts: 490
Re: Seeing just how lazy I can be...
« Reply #10 on: January 05, 2017, 08:50:41 AM »
stiff brush and a little elbow grease
mooseman

https://www.youtube.com/watch?v=R1mMFmDvOPw

This is what we do! Learned it from your little video. Thanks for that.

I feel like I've tried it so many different ways and this works best for us. Definitely makes a bit of a mess but we try to sweep daily anyway.
We try to spin the pallets and do it in the same spot rather than walking around the press. Works a treat!

Offline rusty

  • Hero Member
  • *****
  • Posts: 504
Re: Seeing just how lazy I can be...
« Reply #11 on: January 05, 2017, 08:54:13 AM »
stiff brush and a little elbow grease
mooseman

https://www.youtube.com/watch?v=R1mMFmDvOPw

This is what we do! Learned it from your little video. Thanks for that.

I feel like I've tried it so many different ways and this works best for us. Definitely makes a bit of a mess but we try to sweep daily anyway.
We try to spin the pallets and do it in the same spot rather than walking around the press. Works a treat!

Yeah we do the same. We put down kraft paper down under the press and replace every few weeks