« previous next »
Pages: [1]   Go Down

Author Topic: Thank You Santa!  (Read 2614 times)

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Thank You Santa!
« on: December 25, 2016, 12:07:24 PM »
quick update, we are up and running (the rest of the space is still a mess though). Both Richard and I were impressed with the install and the presses. While I bought the ROQs for their performance, their design is significantly better than what I anticipated. Smooth and solid/sturdy like nothing else I've seen.

We start production with them as soon as we are back from the holidays.

here are two quick pix of the space with and without the presses.

more updates to follow. . .

pierre

p.s. yes, the MHM is still there, just hard to see in the pix
Logged
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline Prosperi-Tees

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4297
  • Common Sense - Get Some
Re: Thank You Santa!
« Reply #1 on: December 25, 2016, 01:44:13 PM »
Nice. Im surprised you have enough electrical capacity in an office setting.
Logged

Offline islandtees

  • Full Member
  • ***
  • Posts: 233
Re: Thank You Santa!
« Reply #2 on: December 25, 2016, 03:13:28 PM »
Yea, not many office spaces offer 3 phase.
« Last Edit: December 25, 2016, 03:17:48 PM by islandtees »
Logged

Offline jvanick

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2477
Re: Thank You Santa!
« Reply #3 on: December 25, 2016, 04:27:43 PM »
Quote from: Prosperi-Tees on December 25, 2016, 01:44:13 PM
Nice. Im surprised you have enough electrical capacity in an office setting.

especially with the recommended wiring of those presses being 125a 3phase (the base of the press has outlets built in to accommodate a few flashes)

Logged

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: Thank You Santa!
« Reply #4 on: December 25, 2016, 08:54:01 PM »
it's office/warehouse space, we just chose to put the presses in the office section. There's 600A of service, so no problem there (although I was worried for a few days).
We had the individual drops run for the flashes as it required much more power if everything combined. As it is, 3 flashes, two ROQ Irons and two presses fit on the 200A panel. It would have been about 80A more to run single drops and several K more in wire and install costs, so we skipped it. I also liked the idea of individual breakers for the equipment, but am realizing now that we will need to come up with some sort of hanging system for the cables.

pierre
Logged
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline screenxpress

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2434
Re: Thank You Santa!
« Reply #5 on: December 25, 2016, 11:26:36 PM »
Quote from: blue moon on December 25, 2016, 12:07:24 PM
quick update, we are up and running (the rest of the space is still a mess though). Both Richard and I were impressed with the install and the presses. While I bought the ROQs for their performance, their design is significantly better than what I anticipated. Smooth and solid/sturdy like nothing else I've seen.

We start production with them as soon as we are back from the holidays.

here are two quick pix of the space with and without the presses.

more updates to follow. . .

pierre

p.s. yes, the MHM is still there, just hard to see in the pix

Well, hell.  If it's that easy, I'm asking Santa for this next year..............

https://www.lamborghini.com/it-en/modelli

Logged
Anything important is never left to the vote of the people. We only get to vote on some man; we never get to vote on what he is to do.  Will Rogers

Offline Crazy Mike

  • !!!
  • Full Member
  • ***
  • Posts: 177
Re: Thank You Santa!
« Reply #6 on: December 26, 2016, 10:04:26 AM »
Quote from: screenxpress on December 25, 2016, 11:26:36 PM
Quote from: blue moon on December 25, 2016, 12:07:24 PM
quick update, we are up and running (the rest of the space is still a mess though). Both Richard and I were impressed with the install and the presses. While I bought the ROQs for their performance, their design is significantly better than what I anticipated. Smooth and solid/sturdy like nothing else I've seen.

We start production with them as soon as we are back from the holidays.

here are two quick pix of the space with and without the presses.

more updates to follow. . .

pierre

p.s. yes, the MHM is still there, just hard to see in the pix

Well, hell.  If it's that easy, I'm asking Santa for this next year..............

https://www.lamborghini.com/it-en/modelli

Why wait for Santa, ask the Easter Bunny. ;D
Logged

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5683
Re: Thank You Santa!
« Reply #7 on: December 26, 2016, 10:34:28 AM »
Looking good my friend. Nothing like new equip to boost  the biz. Merry Christmas to you and all. (Sorry day late!)
Logged

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Re: Thank You Santa!
« Reply #8 on: December 26, 2016, 11:53:10 AM »
uhh... so where did the art department go?! :)
Logged

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: Thank You Santa!
« Reply #9 on: December 26, 2016, 11:58:11 AM »
Quote from: Gilligan on December 26, 2016, 11:53:10 AM
uhh... so where did the art department go?! :)

they are upfront now . . .

pierre
Logged
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline Underbase37

  • Hero Member
  • *****
  • Posts: 790
Re: Thank You Santa!
« Reply #10 on: December 26, 2016, 12:45:19 PM »
Looking good. Is that carpet in the shop?

Murphy

Logged

Online Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Thank You Santa!
« Reply #11 on: December 26, 2016, 03:51:48 PM »
Quote from: Crazy Mike on December 26, 2016, 10:04:26 AM
Quote from: screenxpress on December 25, 2016, 11:26:36 PM

Well, hell.  If it's that easy, I'm asking Santa for this next year..............

https://www.lamborghini.com/it-en/modelli

Why wait for Santa, ask the Easter Bunny. ;D

Heck, for a reward like that,  how about getting a pair of pliers, and making a real offering to the tooth fairy!
Logged
That rug really tied the room together, did it not?

Offline screenxpress

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2434
Re: Thank You Santa!
« Reply #12 on: December 26, 2016, 08:33:29 PM »
LOL
Logged
Anything important is never left to the vote of the people. We only get to vote on some man; we never get to vote on what he is to do.  Will Rogers

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: Thank You Santa!
« Reply #13 on: December 28, 2016, 05:19:22 PM »
Quote from: Underbase37 on December 26, 2016, 12:45:19 PM
Looking good. Is that carpet in the shop?

Murphy

yaeh, carpet and air conditioning. . . we had to cover it with a tarp as it there were plastisol stains all over it!

pierre
Logged
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!
Pages: [1]   Go Up
« previous next »