Author Topic: Roq maintenance  (Read 1985 times)

Offline TCT

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2877
Roq maintenance
« on: December 07, 2016, 06:10:50 PM »
I know some people v have asked in other posts about maintenance on a Roq. Well this week on Monday the little maintenance icon came up on our YOU. I had planned on putting it off until Friday, but then today the maintenance icon came up on our ECO.

I decided to not put it off till Friday and did it today when everyone was on lunch. I had the presence of mind to time it for this post.

SO-
 From beginning to end it took 34min.

YOU 8/10, 50k impression maintenance - 9min.

ECO 10/12, 150k impression maintenance - 19min.

I was not in a hurry to do it, leisurely pace. As long as you know how to use a alan wrench these are very realistic times.
Alex

Hopefully I'll never have to grow up and get a real job...

www.twincitytees.com


Offline Shanarchy

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1421
Re: Roq maintenance
« Reply #1 on: December 07, 2016, 07:14:20 PM »
Mine popped up Monday. I'm planning on doing it Friday.

Offline TCT

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2877
Re: Roq maintenance
« Reply #2 on: December 07, 2016, 10:06:20 PM »
Mine popped up Monday. I'm planning on doing it Friday.
You should report back(unless it takes you a few hours ;) ) on your time, if be interested!
Alex

Hopefully I'll never have to grow up and get a real job...

www.twincitytees.com

Offline Shanarchy

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1421
Re: Roq maintenance
« Reply #3 on: December 08, 2016, 09:57:18 AM »
Will do!

Of course if this took you 9 minutes, it will probably take me an hour  ;D

Offline TCT

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2877
Re: Roq maintenance
« Reply #4 on: December 08, 2016, 10:02:19 AM »
Will do!

Of course if this took you 9 minutes, it will probably take me an hour  ;D

If it is the 50K one, it is 5 3mm alan screws, about a dozen liberal sprays of lube and 2 min of letting the machine index.
Alex

Hopefully I'll never have to grow up and get a real job...

www.twincitytees.com

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6057
Re: Roq maintenance
« Reply #5 on: December 08, 2016, 12:57:49 PM »
"if you know how to use an allen wrench..." Damn, there's always a catch... :o

Steve
I made a mistake once; I thought I was wrong about something; I wasn't

Offline bimmridder

  • Gonzo Member
  • ******
  • Posts: 1889
Re: Roq maintenance
« Reply #6 on: December 11, 2016, 11:53:24 AM »
And you know if Alex says 19 minutes it's really only about three. At least that's what she said.
Barth Gimble

Printing  (not well) for 35 years. Strong in licensed sports apparel. Plastisol printer. Located in Cedar Rapids, IA

Offline TCT

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2877
Re: Roq maintenance
« Reply #7 on: December 11, 2016, 02:51:06 PM »
And you know if Alex says 19 minutes it's really only about three. At least that's what she said.
I save the other 16 for cuddling, like a gentleman...
Alex

Hopefully I'll never have to grow up and get a real job...

www.twincitytees.com