I had a weird dream...

[Fresh Baked Printing]

Last night, I had a dream that I was unpacking my new auto that arrived (I couldn't see a brand). It was being unloaded and setup in my third floor apartment living room (I don't live in an apartment nor would it fit in any living room anyway).
Since I never had an auto before, I went to get P to help inspect it and to  tell me if all of the parts were there. Some were missing.
It used a car engine that was still in the car for the compressor motor. What a weird dream.

[Denis Kolar]

If the press was blue and yellow, that was a nightmare

[tonypep]

Must have been one of those killing machines.

[ebscreen]

Hey, it could probably be done.



My Newman stretching table scares me more than anything in the shop.

[Shawn (EIP)]

My Gilotine style paper ream cutter scares the crap out of me, more so when my kids are here . There's a 12 foot rule , less than 12 feet is too damn close! It has a safety on it but still, gives me the creeps.

[ebscreen]

Does it have the two hand safety? IE you have to use both hands (so that one is not in the path
of the blade) to operate it?

[Shawn (EIP)]

Does it have the two hand safety? IE you have to use both hands (so that one is not in the path
of the blade) to operate it?

No, not really you release the lock and you pull the handle with 2 hands, when cutting a ream you need 2 hands. Besides that it has a very very  sharp exposed blade one eithet side. My buddy sliced his thumb helping me move it up here, not badly but enough to bleed everywhere.

[mooseman]

Last night, I had a dream that I was unpacking my new auto that arrived (I couldn't see a brand). It was being unloaded and setup in my third floor apartment living room (I don't live in an apartment nor would it fit in any living room anyway).
Since I never had an auto before, I went to get P to help inspect it and to  tell me if all of the parts were there. Some were missing.
It used a car engine that was still in the car for the compressor motor. What a weird dream.

no compressor you are supposed to set the drive wheels on the squirrel belts, didn't yours come with squirrel belts?
rube goldberg