Author Topic: I had a weird dream...  (Read 1316 times)

Offline Fresh Baked Printing

  • Hero Member
  • *****
  • Posts: 755
  • "Tattoo Free Since 1965"
I had a weird dream...
« on: November 02, 2011, 08:16:05 AM »
Last night, I had a dream that I was unpacking my new auto that arrived (I couldn't see a brand). It was being unloaded and setup in my third floor apartment living room (I don't live in an apartment nor would it fit in any living room anyway).
Since I never had an auto before, I went to get P to help inspect it and to  tell me if all of the parts were there. Some were missing.
It used a car engine that was still in the car for the compressor motor. What a weird dream.
50% of the time I'm 100% right.
http://www.spiffylab.com


Offline Denis Kolar

  • Gonzo Member
  • ******
  • Posts: 2871
Re: I had a weird dream...
« Reply #1 on: November 02, 2011, 08:22:40 AM »
If the press was blue and yellow, that was a nightmare :)

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5683
Re: I had a weird dream...
« Reply #2 on: November 02, 2011, 08:35:53 AM »
Must have been one of those killing machines.

Offline ebscreen

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4278
Re: I had a weird dream...
« Reply #3 on: November 02, 2011, 12:38:08 PM »
Hey, it could probably be done.



My Newman stretching table scares me more than anything in the shop.

Offline Shawn (EIP)

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1356
Re: I had a weird dream...
« Reply #4 on: November 02, 2011, 12:45:07 PM »
My Gilotine style paper ream cutter scares the crap out of me, more so when my kids are here . There's a 12 foot rule , less than 12 feet is too damn close! It has a safety on it but still, gives me the creeps.

Offline ebscreen

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4278
Re: I had a weird dream...
« Reply #5 on: November 02, 2011, 01:16:00 PM »
Does it have the two hand safety? IE you have to use both hands (so that one is not in the path
of the blade) to operate it?


Offline Shawn (EIP)

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1356
Re: I had a weird dream...
« Reply #6 on: November 02, 2011, 01:30:40 PM »
Does it have the two hand safety? IE you have to use both hands (so that one is not in the path
of the blade) to operate it?

No, not really you release the lock and you pull the handle with 2 hands, when cutting a ream you need 2 hands. Besides that it has a very very  sharp exposed blade one eithet side. My buddy sliced his thumb helping me move it up here, not badly but enough to bleed everywhere.
« Last Edit: November 02, 2011, 01:33:09 PM by endless ink printing »

Offline mooseman

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2215
Re: I had a weird dream...
« Reply #7 on: November 03, 2011, 06:15:56 AM »
Last night, I had a dream that I was unpacking my new auto that arrived (I couldn't see a brand). It was being unloaded and setup in my third floor apartment living room (I don't live in an apartment nor would it fit in any living room anyway).
Since I never had an auto before, I went to get P to help inspect it and to  tell me if all of the parts were there. Some were missing.
It used a car engine that was still in the car for the compressor motor. What a weird dream.

no compressor you are supposed to set the drive wheels on the squirrel belts, didn't yours come with squirrel belts?
rube goldberg
DUE TO CIRCUMSTANCES COMPLETELY WITHIN MY CONTROL YOU SHOULD GET YOUR OWN TEE SHIRT AND A SHARPIE MARKER BY NOON TOMORROW OR SIMPLY CALL SOMEONE WHO GIVES A SHIRT.