« previous next »
Pages: [1]   Go Down

Author Topic: Just finished wrap  (Read 4116 times)

Offline Denis Kolar

  • Gonzo Member
  • ******
  • Posts: 2871
Just finished wrap
« on: October 10, 2016, 08:16:23 AM »
Just finished this project for a family friend.
Did the design (Logo and everything), printed in-house and installed on Saturday.
Came out pretty neat I think.
Logged

Offline Homer

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3208
Re: Just finished wrap
« Reply #1 on: October 10, 2016, 08:44:52 AM »
Not to piss in your corn flakes, just an observation here, take it for what it's worth. Your seams are going the wrong way. they *should* be vertical panels starting from the back of the vehicle. If you do decide to panel horizontally, you want the overlap the other way, so it's on TOP of the bottom panel so it doesn't create a "shelf" for water to sit on. You may see this fail prematurely...just sayin...
Logged
...keep doing what you're doing, you'll only get what you've got...

Offline Denis Kolar

  • Gonzo Member
  • ******
  • Posts: 2871
Re: Just finished wrap
« Reply #2 on: October 10, 2016, 08:55:36 AM »
Quote from: Homer on October 10, 2016, 08:44:52 AM
Not to piss in your corn flakes, just an observation here, take it for what it's worth. Your seams are going the wrong way. they *should* be vertical panels starting from the back of the vehicle. If you do decide to panel horizontally, you want the overlap the other way, so it's on TOP of the bottom panel so it doesn't create a "shelf" for water to sit on. You may see this fail prematurely...just sayin...

I know that. Customer just wanted to eliminate seems.
Put edge sealing tape (Half width) over the seem to prevent the "shelf"  :)

But thanks anyhow, good points to make someone aware of it.
Logged

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: Just finished wrap
« Reply #3 on: October 10, 2016, 09:35:00 AM »
looks nice!

pierre
Logged
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5330
Re: Just finished wrap
« Reply #4 on: October 10, 2016, 10:17:06 AM »
Looks neat, I saw them wrapping a car at the SGIA looks like a lot of work!!!!
Logged
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!

Offline Denis Kolar

  • Gonzo Member
  • ******
  • Posts: 2871
Re: Just finished wrap
« Reply #5 on: October 17, 2016, 08:27:47 AM »
Another one this weekend.
Logged

Offline Doug S

  • Gonzo Member
  • ******
  • Posts: 1482
Re: Just finished wrap
« Reply #6 on: October 17, 2016, 08:45:40 AM »
How difficult is that vinyl when it comes to getting it to lay on them double contours? 
Logged
It's not a job if you love doing it.

Offline Denis Kolar

  • Gonzo Member
  • ******
  • Posts: 2871
Re: Just finished wrap
« Reply #7 on: October 17, 2016, 08:54:09 AM »
If you use cast vinyl, a bit of heat and the right technique, it is not that big of a deal.
Cast vinyl is a must.
I took two 2-day classes, watched a ton of videos, and still struggle with a certain things. If you do not have patience, it is not for you :)
Logged

Offline Doug S

  • Gonzo Member
  • ******
  • Posts: 1482
Re: Just finished wrap
« Reply #8 on: October 17, 2016, 09:10:17 AM »
Before I got into printing, I used to tint car windows.  There were 2 vehicles that were a major pain and that was a VW and a corvette.  I would always tint the back glass using a dry shrink.  It took major patience for sure.  Nice Job on the wrap.
Logged
It's not a job if you love doing it.
Pages: [1]   Go Up
« previous next »