Question - what width pallet paper are you using.

[Action1]

Question - what width pallet paper are you using.
Your feedback is appreciated.

Erik

[kingscreen]

16"

[farmboygraphics]

24", just because that's what we use for making yard signs and decals.

[Action1]

16"

Thank you!

[ZooCity]

18"  for some wiggle room in applying.

[im_mcguire]

we use 18" and trim off the sides. 

[Colin]

16"

[ffokazak]

24"

[Underbase37]

18"

Murphy

[Prosperi-Tees]

16"

[head north]

18" and wrap the sides

[Doug S]

16 " here. 

[Phenex]

18"

[screenprintguy]

16" wide boards, 16" wide tape, 18" wide boards, 18" wide tape, if we load 14's we use the 16 and cut it. Since we go through the 16" so much as that's our main day to day board, we like to lessen the slice time to just front and end of board by using tape exact width, saves a lot of time if we have a week with several tape changes. One thing I love about m&r boards, they cut the top rubber about a 1/32 of an inch in all the way around, makes for a perfect notch to run a vinyl application squeegee down and then a box cutter. never lapping tape to the underside of the board and we never have to mess with it once its squeegee'd down.

[ebscreen]

Since we go through the 16" so much as that's our main day to day board, we like to lessen the slice time to just front and end of board by using tape exact width, saves a lot of time if we have a week with several tape changes.

Okay so my guys try and get me on board with that but then I see them spending more time (as in seven seconds) getting the paper perfectly aligned to the pallet
than it takes to just cut it. I tell them that and yet still they do it haha.

FWIW we use:

6"
12"
16"
18"
22"

and soon to be

36"


Yeah, it's a lot to keep stock on. Which reminds me...