Author Topic: Ink for metal flat stock???  (Read 1097 times)

Offline XG Print

  • Sr. Member
  • ****
  • Posts: 312
Ink for metal flat stock???
« on: November 10, 2016, 03:40:49 PM »
What type of ink would I use to print on some metal sheets.  I have a customer wanting me to do this but I am thinking that I don't want to screw with it.  Trying to figure out what my costs will be before I give a yay or nay.  I think the surface will be clear coated if that matters.
Thanks Guys!


Offline jvanick

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2477
Re: Ink for metal flat stock???
« Reply #1 on: November 10, 2016, 04:09:36 PM »
Nazdar has a bunch of different inks for different substrates.

be aware that most (all?) inks to go on metal substrates are 2 part catalyzed inks, and therefore have a pot life, and need to be cleaned up immediately.    You'll have to use a solvent resistant emulsion, work fast, and most of the inks are extremely volatile (read: flammable and smell extremely bad).