Author Topic: New Toy . . .  (Read 3977 times)

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: New Toy . . .
« Reply #15 on: August 25, 2016, 07:01:32 PM »
Yes I do, it has an upgraded aperture to breakdown the light output by spectrum from 200nm - 600nm.

WOW! Is that a sensor or a meter?
If it's a sensor, where do I get one?

pierre
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!


Offline Steve Harpold

  • Full Member
  • ***
  • Posts: 111
Re: New Toy . . .
« Reply #16 on: August 25, 2016, 07:17:41 PM »
It is a sensor, I needed it to measure up to 16 w/cm^2 without washing out. The software will display a real time graph of all of the wave lengths being produced by a light source.  Where I got it, and had it customized is a different story for a later date!

Offline Denis Kolar

  • Gonzo Member
  • ******
  • Posts: 2871
Re: New Toy . . .
« Reply #17 on: August 26, 2016, 09:54:41 AM »
It shocks the operator when they shut the press down with no apparent reason!!!!
Is that it????

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Re: New Toy . . .
« Reply #18 on: August 26, 2016, 10:29:09 AM »
Did you build it Pierre?

I see Arduino ultrasonic sensor but those are just "commonly used for..." sensor breakouts and could be used for anything.


Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: New Toy . . .
« Reply #19 on: August 26, 2016, 11:08:11 AM »
Did you build it Pierre?

I see Arduino ultrasonic sensor but those are just "commonly used for..." sensor breakouts and could be used for anything.

yes, it's Arduino based . . . cheap  and easy to set up.

pierre
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline JBLUE

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2036
Re: New Toy . . .
« Reply #20 on: August 26, 2016, 06:25:47 PM »
It shocks the operator when they shut the press down with no apparent reason!!!!
Is that it????

That would be the best tool ever.
www.inkwerksspd.com

We are all born ignorant, but one must work hard to remain stupid...... Ben Franklin

Offline ScreenFoo

  • Gonzo Member
  • ******
  • Posts: 1296
  • Semper Fidelis Tyrannosaurus
Re: New Toy . . .
« Reply #21 on: August 27, 2016, 07:46:17 PM »
Neat.  So in the USB mode it's like a flash drive?

You use a RTC module, or does it fake time from the clock?


Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: New Toy . . .
« Reply #22 on: August 28, 2016, 10:58:51 AM »
Neat.  So in the USB mode it's like a flash drive?

You use a RTC module, or does it fake time from the clock?

not working as a flash drive, only an SD card for logging. There is a way to reprogram the Arduino to make it do that, but it's beyond my current (starting) skillset. I am thinking about making it Bluetooth as am not certain of the security issues with WiFi on Arduino.
Yes, it uses a real time clock (RTC) module so it keeps track of dates (needed for the data analysis).

pierre
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5683
Re: New Toy . . .
« Reply #23 on: August 28, 2016, 08:57:05 PM »
Pls call