Author Topic: How long are water based inks good for?  (Read 1219 times)

Offline Admiral

  • Hero Member
  • *****
  • Posts: 876
How long are water based inks good for?
« on: August 25, 2016, 10:04:47 AM »
Plastisol I'm sure some/many have used inks 5+ years old and they were just fine.  How long do water based inks last? I know they need to be mixed up again because they often settle, but I would think 2-3 years is fine right?


Offline Admiral

  • Hero Member
  • *****
  • Posts: 876
Re: How long are water based inks good for?
« Reply #1 on: August 25, 2016, 11:18:59 AM »
Specifically Matsui water based discharge ink (not activated of course).

Offline Inkworks

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1761
  • Pad&Screenprinter
Re: How long are water based inks good for?
« Reply #2 on: August 25, 2016, 12:05:06 PM »
Not long.... some are like 6 months- 1 year. Which make it tough for small shops to stock decent quantities or ready-mixed colours. I have 1/2 a fiver of white that is now only good for non-discharge as it turns to cottage cheese if you try to add activator powder to it.

And yeah, lots of call for non-discharge white dontcha know....  :-\
Wishin' I was Fishin'

Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Re: How long are water based inks good for?
« Reply #3 on: August 25, 2016, 06:59:00 PM »
Our DC mixes hold strong for over a year in most cases. 

WB inks tend to have a ph shift and that's what causes their life to end early. 

Keeping additives out until press time helps a bit with DC ink and a lot with WB.

I looked into this recently and short of having a nice, climate controlled ink area free of uv and very clean handling tools and containers you can't get much further than that 6mo-1yr it seems.