« previous next »
Pages: [1]   Go Down

Author Topic: Calibrating a 4880 print head (FilmMaker)  (Read 1485 times)

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Calibrating a 4880 print head (FilmMaker)
« on: August 18, 2016, 06:50:52 PM »
Not sure the RIP is relative because I think it's just the printer itself here (single channel black being used here).

Check out these films we printed.

That grid is 1pt lines, not sure the font point size.. but you see the dribbles that aren't supposed to be there.

What is the proper way to fix this?
Logged

Offline cbjamel

  • Gonzo Member
  • ******
  • Posts: 1093
Re: Calibrating a 4880 print head (FilmMaker)
« Reply #1 on: August 18, 2016, 07:08:45 PM »
Have you cleaned the heads and done an head alignment.

Sent from my SAMSUNG-SM-G890A using Tapatalk

Logged

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Re: Calibrating a 4880 print head (FilmMaker)
« Reply #2 on: August 18, 2016, 07:20:49 PM »
Not sure about the alignment part.

THOROUGH head cleaning as it had sat up for a few months before we got it.
Logged

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: Calibrating a 4880 print head (FilmMaker)
« Reply #3 on: August 18, 2016, 07:44:50 PM »
if you are printing out of one color, it looks like one of the nozzles is firing late (or early). Try a different color. . .

pierre
Logged
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline JBLUE

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2036
Re: Calibrating a 4880 print head (FilmMaker)
« Reply #4 on: August 18, 2016, 08:09:20 PM »
If it sat a few months you might be screwed. Trying another color is an option but because it sat for so long its going to have an issue. There is an issue with that channel. Sometimes you have to clean it several times to get it to print right. It looks dirty to me and not clogged. Buildup on the nozzle area.
Logged
www.inkwerksspd.com

We are all born ignorant, but one must work hard to remain stupid...... Ben Franklin
Pages: [1]   Go Up
« previous next »