Author Topic: Homemade inkjet flushing solution  (Read 9546 times)

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5683
Homemade inkjet flushing solution
« on: October 26, 2011, 12:13:10 PM »
Looking to replace all those unnecessary backup colors on the 4800 and came across a recipie for this using stuff around the house. A liter would maybe cost a buck. Anyone else heard or tried this?


Offline ebscreen

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4278
Re: Homemade inkjet flushing solution
« Reply #1 on: October 26, 2011, 12:18:09 PM »
Ammonia?

Offline Doug B

  • !!!
  • Hero Member
  • *****
  • Posts: 547
Re: Homemade inkjet flushing solution
« Reply #2 on: October 26, 2011, 12:55:22 PM »
  For flushing, I use Windex injected into an empty cartridge with one of those
giant syringes.

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5683
Re: Homemade inkjet flushing solution
« Reply #3 on: October 26, 2011, 01:22:24 PM »
This for replacing the CMYK cartridges. Uses warm water, isopropyl alchohol, and dish soap. I've been told that those CMYK cartidges are for switch to printing color on paper and not needed for film but this is a dedicated film out putter.

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: Homemade inkjet flushing solution
« Reply #4 on: October 26, 2011, 01:56:36 PM »
how much is the actual flushing solution? I would imagine it not to be too expensive . . .
Does anybody have a source?

pierre
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline inkman996

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3760
Re: Homemade inkjet flushing solution
« Reply #5 on: October 26, 2011, 01:59:59 PM »
We keep our CMY carts filled with the clear cleaning solution, we get it from the same place that sells the ink, GDS I believe. And i do believe it is quite cheap.
"No man is an island"

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5683
Re: Homemade inkjet flushing solution
« Reply #6 on: October 26, 2011, 02:08:41 PM »
how much is the actual flushing solution? I would imagine it not to be too expensive . . .
Does anybody have a source?

pierre
I might be confusing cleaning solution with flushing solution I see the two terms interchanged a lot. This is not my area.....doing research for my artist. But the cleaning solution on Media Street's website is $75 per litre. The homemade solution is about a dollar.

Offline projay

  • Newbie
  • *
  • Posts: 9
Re: Homemade inkjet flushing solution
« Reply #7 on: October 26, 2011, 11:31:40 PM »
So what is the home made solution that stays in the cartridge for replacement of ink....and not just used for flushing???

-Jay

Offline Homer

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3204
Re: Homemade inkjet flushing solution
« Reply #8 on: February 08, 2013, 09:50:33 AM »
stumbled upon this thread doing a google search -  if anyone is still interested in this, I have found that the fluid/cleaner you use for cleaning dry erase boards works fairly well for a flushing/cleaning solution...it's made from isopropyl and water, same components in the "home made" version....
...keep doing what you're doing, you'll only get what you've got...

Offline jsheridan

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2130
Re: Homemade inkjet flushing solution
« Reply #9 on: February 08, 2013, 11:13:58 AM »
Ethyl alcohol is the trick for inkjet solution. Same stuff in handcleaner jell.

Find a bottle of armor all window cleaner at local auto part or walmart store.

Couple bottle cleaned out my 4000
Blacktop Graphics Screenprinting and Consulting Services

Offline JBLUE

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2036
Re: Homemade inkjet flushing solution
« Reply #10 on: February 08, 2013, 11:30:27 AM »
Just make sure to run the clear in the heads your not using. You dont want those to dry out. Having eight of them is like having a bunch of free backups if your film black channel clogs. Just move the ink over and keep printing.
www.inkwerksspd.com

We are all born ignorant, but one must work hard to remain stupid...... Ben Franklin

Online mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7859
Re: Homemade inkjet flushing solution
« Reply #11 on: February 08, 2013, 11:48:40 AM »
newer printers need to use the solution as a way to dissipate the heat.  The 3000's didn't care, they also used a much larger black head.

Newer epsons will error out if they run dry and you will burn a head

Offline RICK STEFANICK

  • Gonzo Member
  • ******
  • Posts: 1925
  • INDUSTRY CONSULTANT-OPERATIONS SPECIALIST
Re: Homemade inkjet flushing solution
« Reply #12 on: February 08, 2013, 07:30:10 PM »
ok. why not just reset them with a chip resetter and leave them empty if your just printing black from here on out?
Specializing in shop assessment's, flow and efficiency

Online mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7859
Re: Homemade inkjet flushing solution
« Reply #13 on: February 08, 2013, 09:31:52 PM »
because you can burn out the whole head assembly from my understanding.  I was talking to the inkjet doctor and that is one the reasons he prefers the 3000's.  I liked my 3000, the parts were getting harder to find though

Offline Rockers

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2073
Re: Homemade inkjet flushing solution
« Reply #14 on: February 09, 2013, 07:11:24 AM »
0001001B is the head driver temperature error. You most likely get this if there is not enough ink going through the print head to cool it down.