Author Topic: How black is your film  (Read 4032 times)

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6055
Re: How black is your film
« Reply #15 on: March 25, 2016, 02:58:53 PM »
Yes to the dye based black, I buy mine from MIS...

Steve
I made a mistake once; I thought I was wrong about something; I wasn't


Offline Ryan

  • Sr. Member
  • ****
  • Posts: 447
Re: How black is your film
« Reply #16 on: March 25, 2016, 03:04:55 PM »
my inks are the Ultrachrome K3. it prints from all heads because I have to replace all colors eventually, though usually 3 blacks for every color one. I've honestly never really looked into do anything different because it hasn't affected me (not that I know of, though I'm sure there has been instances) and at this point, unless someone has experience with Wasatch, I'm out of luck because their CS is the worst. It will cost me $150 just to talk to them....probably need to go back to the drawing board and figure out what I need to do to get this to print the way it should

Offline jsheridan

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2130
Re: How black is your film
« Reply #17 on: March 25, 2016, 03:42:52 PM »
.probably need to go back to the drawing board and figure out what I need to do to get this to print the way it should


Nope.. just a refillable cartridge, chip resetter and some ink.

Fill the cart with the ink, reset the chip and put it in your printer. When the cart gets low, take it out, refill it, reset it then back into the printer.

If you don't want to deal with refilling and whatnot.. then just buy new carts loaded with ink..

http://www.filmoutputsolutions.com/dyeink

Blacktop Graphics Screenprinting and Consulting Services

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: How black is your film
« Reply #18 on: March 25, 2016, 03:50:41 PM »
Get AccuInk from Chromaline and you'll be done messing around with it!

pierre
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline jsheridan

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2130
Re: How black is your film
« Reply #19 on: March 25, 2016, 03:52:18 PM »
Get AccuInk from Chromaline and you'll be done messing around with it!

pierre

ahh that's where to get it from.. cool!
Blacktop Graphics Screenprinting and Consulting Services

Offline Shanarchy

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1421
Re: How black is your film
« Reply #20 on: March 25, 2016, 04:50:22 PM »
I got a set of 8 black cartridges for my 4800 at the AC show from Performance Screen. They had a 50% off show special for $300. Not sure if they will still honor the special being that the show is over, but wouldn't hurt to call.

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6055
Re: How black is your film
« Reply #21 on: March 25, 2016, 05:00:25 PM »
and I gave a set away after my 4800 croaked...

Steve
I made a mistake once; I thought I was wrong about something; I wasn't

Offline InkjetFilmDirect

  • Verified/Junior
  • **
  • Posts: 11
  • We Have the Best Quality & Prices Around!
Re: How black is your film
« Reply #22 on: July 28, 2016, 07:00:16 PM »
Wasatch  - Fixxons waterproof film   -  Epson 4880   ---   Using epson inks,

Stop using epson inks.. they are not uv blocking as they are meant to print on paper and make really pretty colored pictures, not opaque film.

Use a dye or pigment based ink that is designed for screen printing films.

Try out our BLACK-OUT UV Blocking ink designed specifically for screen printing. We also carry 5 Mil. Waterproof Inkjet Film Best Quality and Prices Around!

100% Money Back Guarantee + FREE SHIPPING ALWAYS! Plus a SPECIAL 10% OFF Coupon for TSB forum users below =)
FREE SHIPPING + SPECIAL 10% OFF! Forum Promo Code: TSBtake10

Follow us on Instagram @InkjetFilmDirect For Specials!
WWW.INKJETFILMDIRECT.COM