« previous next »
Pages: [1]   Go Down

Author Topic: Tiny bubbles in silicone print.  (Read 1638 times)

Offline srabadan

  • Verified/Junior
  • **
  • Posts: 66
Tiny bubbles in silicone print.
« on: June 03, 2016, 12:36:34 PM »
Received a strikeoff, simple silicone print. Lots of tiny gas bubbles throughout.

https://www.dropbox.com/s/nl429xwmmwr1vin/bubbles.jpg?dl=0

Anybody have enough experience with silicone to give me some tips on how the shop can apply the silicone without getting gas bubbles?

Thanks and have a nice weekend.
« Last Edit: June 03, 2016, 01:00:09 PM by Frog »
Logged

Offline Colin

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1610
  • Ink and Chemical Product Manager
Re: Tiny bubbles in silicone print.
« Reply #1 on: June 03, 2016, 01:39:51 PM »
is that a clear overprint?

Also:

mesh Count?

Cure Temp?  How long in dryer?

Flashed?

manual or auto?
« Last Edit: June 03, 2016, 01:41:55 PM by Colin »
Logged
Been in the industry since 1996.  5+ years with QCM Inks.  Been a part of shops of all sizes and abilities both as a printer and as an Artist/separator.  I am now the Ink and Chemical Product Manager at Ryonet.

Offline JohnMageeUnionink

  • Verified/Junior
  • **
  • Posts: 24
Re: Tiny bubbles in silicone print.
« Reply #2 on: July 08, 2016, 05:34:24 PM »
Quote from: srabadan on June 03, 2016, 12:36:34 PM
Received a strikeoff, simple silicone print. Lots of tiny gas bubbles throughout.

https://www.dropbox.com/s/nl429xwmmwr1vin/bubbles.jpg?dl=0

Anybody have enough experience with silicone to give me some tips on how the shop can apply the silicone without getting gas bubbles?

Thanks and have a nice weekend.

Which Silicone are you printing?
Logged
John Magee
Technical Sales
Rutland Group
Rutland Ink, Union Ink, Qcm Ink, Printtop Ink
Pages: [1]   Go Up
« previous next »