« previous next »
Pages: [1]   Go Down

Author Topic: puting old belt on old dryer - zipper wire?  (Read 957 times)

Offline Stinkhorn Press

  • !!!
  • Hero Member
  • *****
  • Posts: 545
puting old belt on old dryer - zipper wire?
« on: May 23, 2016, 03:57:20 PM »
what is it? where do you get it?
someone said piano wire?

my (new to me) old dryer came with an old belt and zipper and wire. But it was already in 2 pieces of wire before getting to me. now it's in 3 and very very not smooth from years of use. 2 local hardware stores only have much-too-flexy spool wire. where do you get new wire???
Logged

Offline sqslabs

  • Hero Member
  • *****
  • Posts: 972
  • Work hardened.
Re: puting old belt on old dryer - zipper wire?
« Reply #1 on: May 23, 2016, 05:58:35 PM »
We were short a wire when installing our split belt and used a piece of welding rod that we had at the shop.   Worked for us. :o
Logged
Brett
Squeegee Science
Fort Lauderdale, FL

Offline sqslabs

  • Hero Member
  • *****
  • Posts: 972
  • Work hardened.
Re: puting old belt on old dryer - zipper wire?
« Reply #2 on: May 23, 2016, 06:03:18 PM »
Also, whatever you end up getting, put it in a drill chuck and spin away.  Makes things a helluva lot easier.
Logged
Brett
Squeegee Science
Fort Lauderdale, FL

Offline SI

  • !!!
  • Full Member
  • ***
  • Posts: 172
Re: puting old belt on old dryer - zipper wire?
« Reply #3 on: May 23, 2016, 06:20:09 PM »
i used mig welding wire, i use it for lots of other things as well, but i had it and it worked perfectly
Logged

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: puting old belt on old dryer - zipper wire?
« Reply #4 on: May 23, 2016, 08:44:34 PM »
Some hardware shops sell piano wire, but I'm not sure how long is common. I also used to get it from hobby shops as we made landing gear for airplanes with it.
Logged
That rug really tied the room together, did it not?
Pages: [1]   Go Up
« previous next »