It has been a couple years now...

[Prosperi-Tees]

Since the Anatol Volt hit the market with alot of concern about how it would do. Alot of people thought it was a gimmick but it seems that they have held on and found quite a few users out there. One thing I have not found are complaints about the press. Has anyone heard any issues with the Volt over the past couple of years?

[prozyan]

I have heard literally nothing about it.  Positive or negative.

[Prosperi-Tees]

I have heard literally nothing about it.  Positive or negative.

That could be a good or bad thing I suppose

[Frog]

Perhaps Anatol could give you the name(s) of someone in Central Cal who has one that you could check out.

[Prosperi-Tees]

I don't believe anyone in Central Cal has one installed yet. I know many in LA and a few in your neck of the woods. Last I checked the closest tech is about 400 miles away not sure where but most likely LA. Just looking for honest feedback as I havent seen or heard or read anything bad since they came out except for the natural bashing of Anatol as a whole.

[beanie357]

We have multiple Anatole. Looked at volt at shown. Lots of familiar parts that we never have trouble with.
Servo on the carousel is fine. The screen locks are a nifty manual gizmo that holds well.
Would have no issue buying one.
We have 2 horizons and a used stratus
2 on way in. Had a Titan, sold as needed to use bigger screens.The volt also has some areas engineered that  are better than the horizon.
Quiet sucker as well.
We have seen the service improve over the last 4 years. Parts as well for older stuff. We have a 2009 Mariah, and there had the parts. Big improvement.
I like blu as well. We have a sportsman, starlight, sprint. So we are not a nutcase biased shop.

[3Deep]

I've only played around with one , but never printed anything on one , but seems to be solid press...I will say I didn't care for the manual screen clamps since I have a horizon with air clamps.  The press ran very smooth from what I saw, I would take it over the Brown electric press.