Author Topic: M&R Red Chilil and Anatol Rapid Wave Quartz Flashes - opinions?  (Read 8621 times)

Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
M&R Red Chilil and Anatol Rapid Wave Quartz Flashes - opinions?
« on: October 19, 2011, 07:29:22 PM »
Anyone using either one of these?  What do you like/dislike about the units?

Interoperability with an auto isn't an issue for us as this will be used with the optical sensor/timer on a manual and in the same manner on an auto down the road at times we need an additional flash.  We'll simply place the flash on press and set the controls on the unit itself not via the control panel. 

I have quotes for both models, a 20x24 Chili and a 16x20 Rapid and while M&R offered us a hell of a deal on the Chili, Anatol was willing to add a fan speed control the Rapid for us which I thought would be sweet.  They both look like great units and I'm sure we'll be stoked to have either but figured I'd ask around.

Thanks in advance. 


Offline ftembroidery

  • !!!
  • Full Member
  • ***
  • Posts: 233
  • Just got new glasses, but I'm still disillusioned
Re: M&R Red Chilil and Anatol Rapid Wave Quartz Flashes - opinions?
« Reply #1 on: October 19, 2011, 08:10:52 PM »
I had the 16x20 Rapid Wave Quartz with my Antec Legend 6/6.  I loved it.  The only thing I found necessary was relocating the optical sensor so it was "looking down" at the arm of the station instead of trying to look at the outer edge of the platen.  Once I did that, all "missfires" or "no fires" of the quartz lamps were eliminated.  The one thing I did want (I never got one made), was a DIGITAL readout of the "On" time of the flash.  I wanted to be able to set it for 4.7 seconds (or whatever) and know that it would flash for that amount of time.  The controls that came with it were simple potentiometers/rheostats (read: twist knobs with no identifer scale) and I had to set the time by trial & error with a stop watch until I got what I was happy with.
Grant me the ability to change the things I can, the strength to accept the things I cannot and the wisdom to recognize the difference.

Offline Northland

  • Hero Member
  • *****
  • Posts: 622
Re: M&R Red Chilil and Anatol Rapid Wave Quartz Flashes - opinions?
« Reply #2 on: October 19, 2011, 08:58:37 PM »
I've got a 16X18 RapidWave. I'm happy with it.... with one small exception, the orientation of the lamps.
It has 9 lamps that are oriented front to back. They are controlled in groups of three (left, middle, right).

I would have prefered to have the lamps oriented side to side... then the 3 lamps would be grouped front, middle, back.
I could leave the back three lamps OFF for many of my designs.

... don't have any input on the Chili

Offline 244

  • Gonzo Member
  • ******
  • Posts: 1368
Re: M&R Red Chilil and Anatol Rapid Wave Quartz Flashes - opinions?
« Reply #3 on: October 19, 2011, 09:01:58 PM »
That is how the RedChili works . Front,center,back
Rich Hoffman

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5330
Re: M&R Red Chilil and Anatol Rapid Wave Quartz Flashes - opinions?
« Reply #4 on: October 19, 2011, 09:18:09 PM »
I have the RapidWave on my anatol as well Its a great flash....I really think the only thing thats separates the two would be design and cost other than that, they both do the same job.
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!

Offline alan802

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3535
  • I like to screen print
Re: M&R Red Chilil and Anatol Rapid Wave Quartz Flashes - opinions?
« Reply #5 on: October 19, 2011, 09:32:48 PM »
I've got a 16X18 RapidWave. I'm happy with it.... with one small exception, the orientation of the lamps.
It has 9 lamps that are oriented front to back. They are controlled in groups of three (left, middle, right).

I would have prefered to have the lamps oriented side to side... then the 3 lamps would be grouped front, middle, back.
I could leave the back three lamps OFF for many of my designs.

... don't have any input on the Chili

Can someone enlighten me as to why the zones were made left to right instead of the 3 zones from front to back?  I can see because of a left chest...maybe...but then again I can't see a good reason to do it that way.
I would rather be exposed to the inconveniences attending too much liberty than to those attending too small a degree of it -T.J.
Those who expect to reap the blessings of freedom, must, like men, undergo the fatigues of supporting it -T.P.

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5330
Re: M&R Red Chilil and Anatol Rapid Wave Quartz Flashes - opinions?
« Reply #6 on: October 19, 2011, 09:58:04 PM »
Can't answer that question Alan my flash has the front to back...why they changed it I wouldn't know, just know I like mine the way it is.

Darryl
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!

Offline Northland

  • Hero Member
  • *****
  • Posts: 622
Re: M&R Red Chilil and Anatol Rapid Wave Quartz Flashes - opinions?
« Reply #7 on: October 19, 2011, 10:26:46 PM »
It's possible that not all RapidWaves have the lamp orientation like mine (left, middle, right).

Offline ftembroidery

  • !!!
  • Full Member
  • ***
  • Posts: 233
  • Just got new glasses, but I'm still disillusioned
Re: M&R Red Chilil and Anatol Rapid Wave Quartz Flashes - opinions?
« Reply #8 on: October 19, 2011, 10:28:20 PM »
My Rapid wave was two zones....top and/or bottom.
Grant me the ability to change the things I can, the strength to accept the things I cannot and the wisdom to recognize the difference.

Offline spotcolorsupply

  • !!!
  • Sr. Member
  • ****
  • Posts: 486
Re: M&R Red Chilil and Anatol Rapid Wave Quartz Flashes - opinions?
« Reply #9 on: October 20, 2011, 08:30:13 AM »
It's possible that not all RapidWaves have the lamp orientation like mine (left, middle, right).

That's weird..?? All of the rapid wave flashes I’ve seen are front to back  ???

I guess they tried that for a while, but I don’t think they are making them that way anymore.
Brannon Mullins Spot Color Supply
www.spotcolorsupply.com     sales@spotcolorsupply.com.
We Sell Workhorse Products,Along With Used Equipment, and Printing Supplies!!

Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Re: M&R Red Chilil and Anatol Rapid Wave Quartz Flashes - opinions?
« Reply #10 on: October 21, 2011, 03:09:45 PM »
Thanks for the feedback folks.  Noted on the bulb/zone orientation.

One last ?: intensity control.  Absolute necessity? 

The chili does not have it, rapid wave does.  You can adjust time and height on both.  I'm seeing if I can add it to the chili because I can't see a reason not to have this feature.  Then again, perhaps there's a reason it's excluded. 

Keep in mind that our bread and butter here is thin rayon/poly/cotton blends and the like and we routinely print on all sort of weird substrates, we're definitely not a beefy Ts and gildans kind of shop and many substrates that might be groaned at and avoided, we actively sell and accept with open arms. 

Offline alan802

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3535
  • I like to screen print
Re: M&R Red Chilil and Anatol Rapid Wave Quartz Flashes - opinions?
« Reply #11 on: October 21, 2011, 04:20:04 PM »
If you are printing on substrates that are highly variable from one to the next I would sure as hell want intensity control.  We don't use it very often, cause we don't print on a bunch of touchy substrates that burn easily, but for burnout tees, I couldn't see living without intensity control.  Time is great, but sometimes 1 second at full power will burn the substrate, and if you can knock the intensity down to 50% and flash for 2 seconds, you'll be fine.
I would rather be exposed to the inconveniences attending too much liberty than to those attending too small a degree of it -T.J.
Those who expect to reap the blessings of freedom, must, like men, undergo the fatigues of supporting it -T.P.

Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Re: M&R Red Chilil and Anatol Rapid Wave Quartz Flashes - opinions?
« Reply #12 on: October 24, 2011, 05:41:03 PM »
To follow up, I had to go with the Anatol unit.  I prefer M&Rs build quality and service, it's pretty much second to none, but the only M&R quartz model with intensity control is the Cayenne which is overkill for us.  Anatol's Rapid Wave had that critical feature and they were very accommodating with adding the variable fan speed control that I wanted.  With this unit we should have control over every aspect of the flash- height, levelling, bulb intensity, dwell time and air flow.

Thanks all for chiming in.  That would up being waaay harder of a decision than I expected.  I wound up really hanging on that intensity control because I realized, just like with IR panels, height adjustment can only go so far before you start messing with the 'target' flash area.  With quartz flash times being a freaking second or two, like Alan said above, there's not much else you can do besides drop the intensity.  Time adjustment loses much of it's functionality without control of heat intensity.   

This became more apparent that we absolutely needed control over this when I learned that rayon blends are known scorchers with quartz and we print tri-blends and the like all day around here and the Tultex Blends that get subbed often for these are even thinner and trickier.  My gut tells me we'll be using the quartz with a dwell time much longer than most running autos would use (but still plenty quick for us), the intensity set very low and the air speed on the fans cranked up when printing on these blends and other delicates.  I wish we would have had more choice in bulb type out there because I'm guessing different elements put off different kinds of heat and some may be better for the delicate stuff than others.

I'm kind of scratching my head that the variable fan speed I requested isn't standard as well.  I read about the advantages of this somewhere, that airflow on the flash is not necessarily just for printing WB (I'm naive with this but I don't expect to be flashing WB very often, if ever) but for dissipating the smoke that comes off the garment and frustrates the heat waves from penetrating the ink layer. 

Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Re: M&R Red Chilil and Anatol Rapid Wave Quartz Flashes - opinions?
« Reply #13 on: October 24, 2011, 05:41:52 PM »
Oh and, by the way, I confirmed w. Anatol that the zones go front to back not side to side with the flashes.  Not sure why North's go the other way.

Offline 244

  • Gonzo Member
  • ******
  • Posts: 1368
Re: M&R Red Chilil and Anatol Rapid Wave Quartz Flashes - opinions?
« Reply #14 on: October 24, 2011, 10:52:17 PM »
Oh and, by the way, I confirmed w. Anatol that the zones go front to back not side to side with the flashes.  Not sure why North's go the other way.
the Red chili can have power settings if you need it. We do it on the larger  red chili units already
Rich Hoffman