Opportunity is missed by most people because it is dressed in overalls and looks like work. - Thomas Edison
Hey Rick: Mike gets the 3M from Nazdar SourceOne. Terrie can certainly quote you a price for this. We keep lots of stock. Sent from my iPad using Tapatalk
Its the 3M 2 part system that beats all.......... however be prepared for sticker shock. Same beads used in traffic signs. Hard patent to beat or go around
300pcs might be a drag for heat press depending on your setup and due to the cost, depending on the image size but the 3M cad material is a nice alternative if you don't want to print. I imagine it carries the same certifications as the ink?
the 3m cad cut stuff is CRAZY bright. We use it for some jackets every year. Customer loves them.
Quote from: Rob Coleman on November 03, 2016, 09:08:30 PMHey Rick: Mike gets the 3M from Nazdar SourceOne. Terrie can certainly quote you a price for this. We keep lots of stock. Sent from my iPad using TapatalkThanks Rob, Is the lighter color still available?
I know it's been asked 1,000 times on here already, but I figured I'd bring it back up as I have 300pcs that needs to have a reflective ink, customer had this done before at another shop but they were not happy with how the ink reflected light. I tested some Union stuff and it seemed ok but not great like other prints I've seen, I have a qt of the Optilux but I don't like that it needs to be mixed and then the left over ink has to be trashed as expensive as this stuff is!!! I heard one stroke has a good one, but I have not tried it. Also my pressman said he used one at a shop he worked at about 8 years ago that did a lot of Air Force printing and that they used right out of the bucket no mixing and that it worked great but he can not remember the name of it.......any ideas or suggestions would be greatly appreciated.