Poll results at this link
http://www.theshirtboard.com/index.php?topic=1820.0And once again, thank you to International Coatings for this month's prize!The entries are repeated here:
Remember that all factors come into play here. Design, execution, and just how it hits you!
Description: 9 color sim process plastisol 60 lpi
Description: 4 color, 2 white, orange and black, on black.
Description: 6 color water based discharge using overprinting to simulate a 7th color.
205 Roller mesh on MZX 18x20’s
Description: The customer wanted this print to be artsy without paying for a lot of screens and did not like half tones.
They also were very interested in making each print unique.
It was simple we used two screens, white and the mix colored.
I set a person up at the last screen with three buckets of ink and paddles.
First we added just enough ink to barely flood, then the person would dab a couple drops on randomly every two prints.
I used a very very slow flood to help spread with out mixing and we stopped twice to card out the excess mixed ink.
In the end each print was unique and it did not take much longer than normal. Plus we charged adequately.
Description: This is a 7 color simulated print.
Printed on a 8 color M&R auto
