« previous next »
Pages: [1]   Go Down

Author Topic: Tri Purpose Platen from Action  (Read 1070 times)

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5683
Tri Purpose Platen from Action
« on: April 14, 2016, 03:24:11 PM »
I've designed a triple purpose pallet that does pockets, inside neck labels, and can accommodate a standard 15' print as well. So if your printing backs, then pockets........ just turn them around.  And, Bonus, it does 2 at a time on the pocket/label side. Erik is sending me a 3-d rendering to confirm the configuration and Bingo we have a winner. Much thanks to Erik and Mitzi on this project
Logged

Offline mimosatexas

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4221
  • contributor
Re: Tri Purpose Platen from Action
« Reply #1 on: April 14, 2016, 05:31:08 PM »
Don't they already have one of these with 3 pockets/tags on one side?
Logged

Offline Underbase37

  • Hero Member
  • *****
  • Posts: 790
Re: Tri Purpose Platen from Action
« Reply #2 on: April 14, 2016, 05:56:25 PM »
Nice. Let's see what you come up with.

Murphy

Logged

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5683
Re: Tri Purpose Platen from Action
« Reply #3 on: April 15, 2016, 04:44:30 AM »
Quote from: mimosatexas on April 14, 2016, 05:31:08 PM
Don't they already have one of these with 3 pockets/tags on one side?

Mine is different.
Logged

Offline jvanick

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2477
Re: Tri Purpose Platen from Action
« Reply #4 on: April 15, 2016, 07:37:56 AM »
Quote from: mimosatexas on April 14, 2016, 05:31:08 PM
Don't they already have one of these with 3 pockets/tags on one side?

has anyone used those on an auto?  I'd think the screen 'snap' from the squeegee falling into the 'holes' between the wings would cause problems?

Logged
Pages: [1]   Go Up
« previous next »