Author Topic: Shur-loc Panels  (Read 1326 times)

Offline cbjamel

  • Gonzo Member
  • ******
  • Posts: 1093
Shur-loc Panels
« on: April 11, 2016, 10:44:13 PM »
Do you have to abraid these or not? Also is polyken tape just duct tape or different type?

Thanks,
Shane


Offline jsheridan

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2130
Re: Shur-loc Panels
« Reply #1 on: April 12, 2016, 12:13:32 AM »
You don't need to abrade mesh unless you're using capillary film and even then it's a maybe.

Polyken tape is a thicker fabric tape coated with a natural rubber adhesive that is chemical resistant.

Blacktop Graphics Screenprinting and Consulting Services

Offline cbjamel

  • Gonzo Member
  • ******
  • Posts: 1093
Re: Shur-loc Panels
« Reply #2 on: April 12, 2016, 12:25:12 AM »
Thanks John! Just wanted to sure on the abraiding. Wasn't sure on the tape.
Shane

You don't need to abrade mesh unless you're using capillary film and even then it's a maybe.

Polyken tape is a thicker fabric tape coated with a natural rubber adhesive that is chemical resistant.