"He who marches out of step hears another drum." ~ Ken Kesey
I think the end result would be roughly the same. In our testing we found no appreciable difference in EOM regardless of which side you coat more. That final coat on the squeegee side just pushes it all back through the mesh to the print side.
Quote from: Screen Dan on March 23, 2016, 02:57:29 PMI think the end result would be roughly the same. In our testing we found no appreciable difference in EOM regardless of which side you coat more. That final coat on the squeegee side just pushes it all back through the mesh to the print side.Screen Dan, could one therefore assume that you could coat from either side of the screen without a difference? i.e, 3/0 v. 2/1 I've been mulling this over a lot lately, if we need to be flipping screen to coat or if we need to have an auto coater with dual troughs. It seems like the answer is no if using thin thread mesh but old habits die hard.