Author Topic: Inverse Tensioning On Roller Frames (Read 1427 times)

AntonySharples · « **on:** February 25, 2016, 02:34:53 PM »

We've been doing inverse tensioning on our roller frames and getting mixed results. Does anyone else do this as opposed to traditional stretching to a certain newtons?

GKitson · « **Reply #1 on:** February 25, 2016, 02:42:21 PM »

Quote from: eliteteamsupply on February 25, 2016, 02:34:53 PM

We've been doing inverse tensioning on our roller frames and getting mixed results. Does anyone else do this as opposed to traditional stretching to a certain newtons?

More info please

ScreenFoo · « **Reply #2 on:** February 25, 2016, 02:48:04 PM »

I'm guessing you mean reverse curve?

Like when you leave more slack near the corners to compensate for the rollers deflection?

AntonySharples · « **Reply #3 on:** February 25, 2016, 03:36:13 PM »

Quote from: ScreenFoo on February 25, 2016, 02:48:04 PM

I'm guessing you mean reverse curve?

Like when you leave more slack near the corners to compensate for the rollers deflection?

Yes

Sbrem · « **Reply #4 on:** February 25, 2016, 05:28:21 PM »

What? Not following...

Steve

ScreenFoo · « **Reply #5 on:** February 25, 2016, 07:29:04 PM »

Sbrem: There's info on it in the Stretch Devices PDF: http://stretchdevices.com/sites/default/files/Quick_Stretch_for_4R-English_0.pdf

Elite: Do you get mixed results without doing a reverse curve?
IME it was a serious pain to get it just right... and the benefits for lower tension 23x31 users like me seem minimal, if they exist.

News:

Author Topic: Inverse Tensioning On Roller Frames (Read 1427 times)

AntonySharples

Inverse Tensioning On Roller Frames

GKitson

Re: Inverse Tensioning On Roller Frames

ScreenFoo

Re: Inverse Tensioning On Roller Frames

AntonySharples

Re: Inverse Tensioning On Roller Frames

Sbrem

Re: Inverse Tensioning On Roller Frames

ScreenFoo

Re: Inverse Tensioning On Roller Frames