Adhering patches, appliqu?s, emblems, and embroideries just got a lot easier with a great product offered by Floriani Commercial Products called Press N Bond?. This versatile bonding material allows you to attach decorations and provide a secure enough bond that no stitching is necessary. Press N Bond? seals the back of the appliqu?, embroidery, or patch with a clear, highly fusible coating. You can launder or even dry-clean apparel with Press N Bond? and never have to worry about the decoration peeling or coming off. It can be used on cotton, polyester, poly-cotton blends, vinyl, and most other fabrics.
Press N Bond is so easy to use. Simply trace or print the reverse image on the paper side of Press N Bond and cut the shape to size. Using an iron temperature of at least 260 degrees, fuse the material to the back of the fabric, patch, or embroidery. Hold pressure for at least four seconds and once cooled, peel back the release paper. Position the decoration on the base material and press from the fabric side at the same iron temperature and hold for four seconds. If you find you are not getting a good bond, it means your iron is not hot enough to fully melt the adhesive. Try again after increasing the iron?s temperature. Press N Bond comes in a package of 30 8 ?- by-11 inch sheets and 48 inches by 10-yard roll.
For more information about Floriani Commercial Product?s full line of stabilizers, threads, and more, go to
www.florianicommercial.com. To contact Steve Coakley, call 865-549-5115; fax: 865-549-5116; or e-mail:
steve@florianicommercial.com.
