« previous next »
Pages: [1]   Go Down

Author Topic: MHM users with DTS  (Read 1711 times)

Offline Printficient

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1222
MHM users with DTS
« on: January 12, 2016, 07:07:14 AM »
What CTS unit are you using and how does it hold the screen?  Also what type of screen are you using?
Logged
Shop-Doc "I make house calls"
Procedure Video Training
Press Inspections
Tips and Tricks Training
404-895-1796 Sonny McDonald

Offline Dottonedan

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 5907
  • Email me at art@designsbydottone.com
Re: MHM users with DTS
« Reply #1 on: January 12, 2016, 09:52:42 AM »
Two of my own customers had MHM and we modified our I-Image STE2 setup for them. Doesn't take a lot of change.

I forgot to add that one shop used Newmans and one used static.
« Last Edit: January 12, 2016, 11:50:18 AM by Dottonedan »
Logged
Artist & high end separator, Owner of The Vinyl Hub, Owner of Dot-Tone-Designs, Past M&R Digital tech installer for I-Image machines. Over 35 yrs in the apparel industry. e-mail art@designsbydottone.com

Offline BorisB

  • Sr. Member
  • ****
  • Posts: 377
Re: MHM users with DTS
« Reply #2 on: January 12, 2016, 11:45:44 AM »
We use both types, stretch&glue and Newmans. Our DTS unit is from german company CST

We just built FPU in it
Logged

Offline jsheridan

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2130
Re: MHM users with DTS
« Reply #3 on: January 12, 2016, 08:07:50 PM »
Quote from: BorisB on January 12, 2016, 11:45:44 AM
We just built FPU in it

Had a Douthitt at Jaks that was supplied with pins from Douthitt (Mark)
I like Boris, modified it after that to make it fit what we needed it to do.
Logged
Blacktop Graphics Screenprinting and Consulting Services

Offline bimmridder

  • Gonzo Member
  • ******
  • Posts: 1886
Re: MHM users with DTS
« Reply #4 on: January 12, 2016, 08:29:33 PM »
Mark's great
Logged
Barth Gimble

Printing  (not well) for 35 years. Strong in licensed sports apparel. Plastisol printer. Located in Cedar Rapids, IA

Offline Printficient

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1222
Re: MHM users with DTS
« Reply #5 on: January 13, 2016, 06:14:47 AM »
Quote from: jsheridan on January 12, 2016, 08:07:50 PM
Quote from: BorisB on January 12, 2016, 11:45:44 AM
We just built FPU in it

Had a Douthitt at Jaks that was supplied with pins from Douthitt (Mark)
I like Boris, modified it after that to make it fit what we needed it to do.
What did you do to the Douthitt?
Logged
Shop-Doc "I make house calls"
Procedure Video Training
Press Inspections
Tips and Tricks Training
404-895-1796 Sonny McDonald

Offline BorisB

  • Sr. Member
  • ****
  • Posts: 377
Re: MHM users with DTS
« Reply #6 on: January 13, 2016, 06:22:50 AM »
Quote from: Printficient on January 13, 2016, 06:14:47 AM
Quote from: jsheridan on January 12, 2016, 08:07:50 PM
Quote from: BorisB on January 12, 2016, 11:45:44 AM
We just built FPU in it

Had a Douthitt at Jaks that was supplied with pins from Douthitt (Mark)
I like Boris, modified it after that to make it fit what we needed it to do.
What did you do to the Douthitt?

Maybe you find this helpful:

https://www.youtube.com/watch?v=cwN_1GXQLng
Logged
Pages: [1]   Go Up
« previous next »