Author Topic: Tack for all over printing on fleece  (Read 1560 times)

Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Tack for all over printing on fleece
« on: December 14, 2015, 02:40:29 PM »
What does everyone use for tacking down the pockets when all over style printing on fleece?  We've been using spray, experimented with both web and mist, and both work but leave some staining from the solvent.  It hasn't been an issue with our clients as the print covers this most of the time but we do a hefty volume of these prints on higher end hoodies and we're a little paranoid about the solvent marks. 

I know corn starch + water is used on Ts for all over but never tried on fleece, assuming it wouldn't grip well enough.  Our suppliers just suggested what we're already using.  Maybe there's a trick to the application of the mist spray?


Offline jsheridan

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2130
Re: Tack for all over printing on fleece
« Reply #1 on: December 14, 2015, 07:07:12 PM »
Jantex makes a sprayable starch based product for all over printing that leaves no residue and rinses away in the first wash.

I'm not sure of the product name off hand so call them for info 562 949 3900
Blacktop Graphics Screenprinting and Consulting Services

Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Re: Tack for all over printing on fleece
« Reply #2 on: December 14, 2015, 08:16:01 PM »
Thanks John, I'll look into it first thing tomorrow!

Offline Underbase37

  • Hero Member
  • *****
  • Posts: 790
Re: Tack for all over printing on fleece
« Reply #3 on: December 16, 2015, 10:06:50 AM »
Bump. Did you have any luck. Just did some printing on pockets yesterday and was thinking about this post.

Sent from my XT1585 using Tapatalk


Offline Ross_S

  • Sr. Member
  • ****
  • Posts: 349
Re: Tack for all over printing on fleece
« Reply #4 on: December 16, 2015, 10:28:44 AM »
Tekmar has this adhesive

Offline Tekmar

  • Newbie
  • *
  • Posts: 3
Re: Tack for all over printing on fleece
« Reply #5 on: December 16, 2015, 12:55:44 PM »
We make an excellent product formulated specifically for the all over printing market.  It is called TB-STX  it is a starch based product that can be sprayed inside the shirt (or pocket) and dissipates when run through the dryer.  Any additional residual washes away.

check out http://tekmarltd.com/products/bulk-adhesives/tee-tak/

You can request a sample on the website

Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Re: Tack for all over printing on fleece
« Reply #6 on: December 16, 2015, 01:05:02 PM »
I'll call to follow up on this but Tekmar, this product will work with fleece?

Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Re: Tack for all over printing on fleece
« Reply #7 on: December 16, 2015, 01:11:37 PM »
Tekmar sample is on the way, Jantex's phone is disconnected.  I'll report back on it but it sounds like a little extra of the starch spray might do the trick.

Offline Underbase37

  • Hero Member
  • *****
  • Posts: 790
Re: Tack for all over printing on fleece
« Reply #8 on: December 17, 2015, 04:30:17 PM »
Nice. Calling as well. I tried dealing with jantex a while back but never got far either.

Sent from my XT1585 using Tapatalk