« previous next »
Pages: [1]   Go Down

Author Topic: CorelDRAW weirdness when mirrored  (Read 2425 times)

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
CorelDRAW weirdness when mirrored
« on: November 19, 2015, 05:22:18 PM »
I'm talking about the fade in the sky changing when the whole image is horizontally mirrored.
Fortunately I could work around this aberration in the output stage (where it mirrors correctly), but why would it do this?
Logged
That rug really tied the room together, did it not?

Offline ftembroidery

  • !!!
  • Full Member
  • ***
  • Posts: 233
  • Just got new glasses, but I'm still disillusioned
Re: CorelDRAW weirdness when mirrored
« Reply #1 on: November 20, 2015, 12:31:13 PM »
I have had instances with Draw/Illy/PPaint/PShop looking "wrong" or "weird" on the screen.  I have found that if I "minimize" the display and then "restore" it, things appear as they should.  I suspect it's a lack of memory or RAM.  Does your weird display PRINT properly?
Logged
Grant me the ability to change the things I can, the strength to accept the things I cannot and the wisdom to recognize the difference.

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: CorelDRAW weirdness when mirrored
« Reply #2 on: November 20, 2015, 12:42:58 PM »
Quote from: ftembroidery on November 20, 2015, 12:31:13 PM
I have had instances with Draw/Illy/PPaint/PShop looking "wrong" or "weird" on the screen.  I have found that if I "minimize" the display and then "restore" it, things appear as they should.  I suspect it's a lack of memory or RAM. Does your weird display PRINT properly?

Not in this case. The only solution I found was sending it to the printer right-reading, and mirroring the output
Logged
That rug really tied the room together, did it not?
Pages: [1]   Go Up
« previous next »