Author Topic: Replacing the batteries PLC  (Read 2817 times)

Offline artprofile

  • Verified/Junior
  • **
  • Posts: 28
Replacing the batteries PLC
« on: December 01, 2015, 11:03:23 AM »
Greetings to all! I need your help!

I can not wait for an answer to the forum mrprint, so I ask here. Thanks in advance for any advice!

http://forums.mrprint.com/showthread.php?4577-Replacing-the-batteries-in-older-M-amp-R-presses&p=21313#post21313


Offline rmonks

  • !!!
  • Sr. Member
  • ****
  • Posts: 457
Re: Replacing the batteries PLC
« Reply #1 on: December 01, 2015, 11:32:32 AM »
I replace mine once a year. I don't have the instructions before me but its not difficult. BUT! please note I think you have like 15 seconds to get it changed when you disconnect the old battery.

Offline artprofile

  • Verified/Junior
  • **
  • Posts: 28
Re: Replacing the batteries PLC
« Reply #2 on: December 01, 2015, 11:48:15 AM »
I replace mine once a year. I don't have the instructions before me but its not difficult. BUT! please note I think you have like 15 seconds to get it changed when you disconnect the old battery.
I found a brief instruction - but I want to get a real council - who are already doing it!

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Replacing the batteries PLC
« Reply #3 on: December 01, 2015, 08:32:14 PM »
Greetings to all! I need your help!

I can not wait for an answer to the forum mrprint, so I ask here. Thanks in advance for any advice!

http://forums.mrprint.com/showthread.php?4577-Replacing-the-batteries-in-older-M-amp-R-presses&p=21313#post21313


It appears that it is considered a little tricky, but they give a phone number and are more than willing to walk you through the procedure. Why don't you call them with your question(s)? I bet that gets you a quicker response than a forum.
That rug really tied the room together, did it not?

Offline Underbase37

  • Hero Member
  • *****
  • Posts: 790
Re: Replacing the batteries PLC
« Reply #4 on: December 01, 2015, 11:01:54 PM »
Some are very easy, some are a bit tricky, it just depends where it is in the chain and how its access. If you are unsure about anything you really should have M&R walk you through it over the phone. You don't want any info getting lost or mixed up. This can just cause more problems in the future you my be unaware of at the present moment.

Sent from my XT1585 using Tapatalk

Offline artprofile

  • Verified/Junior
  • **
  • Posts: 28
Re: Replacing the batteries PLC
« Reply #5 on: December 02, 2015, 03:32:58 AM »
I wrote the name in the technical department. a way of communicating by email. the answer is still no.

Offline 244

  • Gonzo Member
  • ******
  • Posts: 1368
Re: Replacing the batteries PLC
« Reply #6 on: December 02, 2015, 10:48:14 AM »
I wrote the name in the technical department. a way of communicating by email. the answer is still no.
I dont know what this means but we cant help with the information you are providing. Are you the origional owner? Do you have a manual? Serial Number? Help us help you!!
Rich Hoffman

Offline artprofile

  • Verified/Junior
  • **
  • Posts: 28
Re: Replacing the batteries PLC
« Reply #7 on: December 02, 2015, 11:18:20 AM »
I wrote the name in the technical department. a way of communicating by email. the answer is still no.
I dont know what this means but we cant help with the information you are providing. Are you the origional owner? Do you have a manual? Serial Number? Help us help you!!

Ok!

sportsman SERIAL #010664808
PLC FX1n-60MR The serial number # SPP 0607
A battery FX1NBAT By MITSUBISHI

The instruction in Russian, unfortunately there is no section for battery replacement.
in any case, that I was given.

The instructions in English, there's a different battery.