Author Topic: How do I join nodes in coreldraw x5?  (Read 1222 times)

Offline Mark @ Hurricane Printing

  • Hero Member
  • *****
  • Posts: 567
How do I join nodes in coreldraw x5?
« on: November 07, 2015, 02:41:47 PM »
I made a single design using the bezier tool....once I finished making it I used the weld tool to connect all the bezier outlines....I am now trying to fill the design with a color and it is not filling.....when I "select" the design i see three spots that indicate nodes are there which i think means the object is not completely welded.

How do I get rid of those nodes so i can fill the design?
Mark


Offline ol man

  • Sr. Member
  • ****
  • Posts: 295
Re: How do I join nodes in coreldraw x5?
« Reply #1 on: November 07, 2015, 02:44:19 PM »
you can select the two nodes , right mousebutton click , and a an option for join nodes should be there....
hope that helps

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: How do I join nodes in coreldraw x5?
« Reply #2 on: November 07, 2015, 02:48:18 PM »
A screen shot could only help as well.

I have to admit that I have little experience with the bezier tool, but it sounds like simply your nodes are not connected.
ol man's suggestion seems to bear this out.
That rug really tied the room together, did it not?

Offline ol man

  • Sr. Member
  • ****
  • Posts: 295
Re: How do I join nodes in coreldraw x5?
« Reply #3 on: November 07, 2015, 02:48:31 PM »
also , same feature would be available in your property tool bar... as well as the "close curve" option, which looks like a backwards "c" with a tiny red arrow...