Author Topic: Help with Settling Tank  (Read 6559 times)

Offline Maxie

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1328
Help with Settling Tank
« on: November 07, 2015, 02:16:38 PM »
Anybody have and good ideas for making a settling tank.
I'd like to make one and am thinking about how to make it easy and clean to use.
Maxie Garb.
T Max Designs.
Silk Screen Printers
www.tmax.co.il


Offline Wildcard

  • !!!
  • Full Member
  • ***
  • Posts: 231
Re: Help with Settling Tank
« Reply #1 on: November 08, 2015, 08:53:04 AM »
I had an idea of setting up a second pass through storage tank after a settling tank, that my pressure washer would pump water from for reclaiming. Using fresh water for all other washout tasks. Seems like a good option to recycle water...

Sent from my SM-P555 using Tapatalk


Offline mooseman

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2215
Re: Help with Settling Tank
« Reply #2 on: November 08, 2015, 09:39:24 AM »
here is a system we have been using for about 6 years. built for less than $75.00
mooseman
DUE TO CIRCUMSTANCES COMPLETELY WITHIN MY CONTROL YOU SHOULD GET YOUR OWN TEE SHIRT AND A SHARPIE MARKER BY NOON TOMORROW OR SIMPLY CALL SOMEONE WHO GIVES A SHIRT.

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Re: Help with Settling Tank
« Reply #3 on: November 08, 2015, 10:36:08 AM »
Hey Moose, ours clogged our p-trap the other day.  We think we were washing too much plastisol down the drain.

Offline Binkspot

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1108
Re: Help with Settling Tank
« Reply #4 on: November 08, 2015, 11:49:18 AM »
I have a box under the wash out with a windows screen over the top that collects the big stuff. When it gets dirty I toss it and put new screen in it. That is pumped into a open top drum, I have a drain from the top of the first into a second which drains into a third. The third one has 2 micron filter bags the water passes through before being pumped into the slop sink. The second pump can be eliminated if you can get the whole thing above the drain and let gravity work its magic.
« Last Edit: November 08, 2015, 04:57:56 PM by Frog »

Offline mooseman

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2215
Re: Help with Settling Tank
« Reply #5 on: November 08, 2015, 04:51:40 PM »
Hey Moose, ours clogged our p-trap the other day.  We think we were washing too much plastisol down the drain.

Hey Gilly,
no issues here but I also do not have a trap on the wash out booth. There is about a 60 foot run and a 7 foot drop and the drain don't stop going it just slows down.
reminds me it is time to clean that sucker out. Last time I mucked out about 70 pounds of goooooooo, think I will call Mike Rowe the dirty jobs guy ;).
mooseman
DUE TO CIRCUMSTANCES COMPLETELY WITHIN MY CONTROL YOU SHOULD GET YOUR OWN TEE SHIRT AND A SHARPIE MARKER BY NOON TOMORROW OR SIMPLY CALL SOMEONE WHO GIVES A SHIRT.

Offline TCT

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2877
Re: Help with Settling Tank
« Reply #6 on: November 08, 2015, 06:26:48 PM »
Geeez Brian! What are you going for? Bottled water out of your final tank?? :P
Alex

Hopefully I'll never have to grow up and get a real job...

www.twincitytees.com

Offline screenprintguy

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1677
  • Constantly thanking the Lord!
Re: Help with Settling Tank
« Reply #7 on: November 08, 2015, 06:35:19 PM »
Brian, where did you get the barrels?
Evolutionary Screen Printing & Embroidery
3521 Waterfield Parkway Lakeland, Fl. 33803 www.evolutionaryscreenprinting.com

Offline Binkspot

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1108
Re: Help with Settling Tank
« Reply #8 on: November 08, 2015, 06:43:12 PM »
They are plastic 55 gallon drums, cut the tops off with a circular saw. I get them from the boat yards in late fall, non toxic antifreeze they use to winterized the boats come in them and they are glad to get rid of them.

The water comes out pretty clean, haven't had to wash out the slop sink for almost a year now. Next one I'll build a boiler and steam the water off the solids????

Offline screenprintguy

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1677
  • Constantly thanking the Lord!
Re: Help with Settling Tank
« Reply #9 on: November 08, 2015, 06:46:30 PM »
I'll have to check around. Thanks man
Evolutionary Screen Printing & Embroidery
3521 Waterfield Parkway Lakeland, Fl. 33803 www.evolutionaryscreenprinting.com

Offline TCT

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2877
Re: Help with Settling Tank
« Reply #10 on: November 08, 2015, 06:56:16 PM »
Mike, ask some of your vendors. Pouring down 55gal into gallons usually leave them with extras...
Alex

Hopefully I'll never have to grow up and get a real job...

www.twincitytees.com

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7862
Re: Help with Settling Tank
« Reply #11 on: November 09, 2015, 12:05:18 PM »
I call BS, Brian is brewing some bathtub liquor there.

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6055
Re: Help with Settling Tank
« Reply #12 on: November 09, 2015, 04:14:57 PM »
we've got the Blackline, close to $1000, works great, and the local enviro police love it. The screen guy maintains it, pretty easy. Yes, it was expensive, but the time involved was a lot shorter than building one. I've built a lot of things over the years, but nowadays, I find myself not wanting to spend the time, too many other things to do...

Steve
I made a mistake once; I thought I was wrong about something; I wasn't

Offline TCT

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2877
Re: Help with Settling Tank
« Reply #13 on: November 09, 2015, 09:58:20 PM »
I call BS, Brian is brewing some bathtub liquor there.
While I wouldn't put it past him, the thought of discharge hooch makes me want to pour out this beer in my hand and switch to 24/7 water! ;D
Alex

Hopefully I'll never have to grow up and get a real job...

www.twincitytees.com

Offline screenprintguy

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1677
  • Constantly thanking the Lord!
Re: Help with Settling Tank
« Reply #14 on: November 29, 2015, 03:15:46 PM »
Hey Brian, where do you get the filter bags?
Evolutionary Screen Printing & Embroidery
3521 Waterfield Parkway Lakeland, Fl. 33803 www.evolutionaryscreenprinting.com