screen printing > Separations

Vid tutorial on changing an element for various mock ups.

(1/2) > >>

Dottonedan:
 Andy (Frog) had a question about changing the color of an RGB file for various ink colors and garment colors for mock ups. I did this quick vid to assist with that task.

Thanks
DAN

https://youtu.be/j3v0gCE6Ewc

Frog:
I cheated and fast forwarded to see the results. Looks like a winner and can't wait for "me and the computer" time late tonight or early tomorrow morning. That's when I do most of my art and lernin'.

btw, the custy went with my nice clean vector trace with high contrast and no shading, but I still need this (as I'm sure others do as well)

Thanks Dan

redwoodtees:
Thanks for making the video. I can see how using layers and blending does not really advance you towards the end goal of making film.

Squeegie:
Great info Dan.

Is there an advantage or disadvantage in doing this same thing in channels vs layers?

My method would be the same as yours up until you took the new channel selection back to layers.
Instead, I would create a new channel and fill it with solid black and change the channel option to the garment color needed. I would then place it above the image channel.
Now I have the ability to change either channel to achieve the desired mock up colors.
Once completed I merge the spot channels to RGB and save for web as a .jpg to send the client.

I like your layer method and will play with it when I get a chance.  Just wondering if either method is "better" than the other?

Bill

Dottonedan:

--- Quote from: Squeegie on October 27, 2015, 10:38:45 AM ---Great info Dan.

Is there an advantage or disadvantage in doing this same thing in channels vs layers?

My method would be the same as yours up until you took the new channel selection back to layers.
Instead, I would create a new channel and fill it with solid black and change the channel option to the garment color needed. I would then place it above the image channel.
Now I have the ability to change either channel to achieve the desired mock up colors.
Once completed I merge the spot channels to RGB and save for web as a .jpg to send the client.

I like your layer method and will play with it when I get a chance.  Just wondering if either method is "better" than the other?

Bill

--- End quote ---


That's a good one as well. The only difference or the reason I would use my method all depends on the end result needed. For me mostly, the reason I go back into layers would be to set the art up on garment mock ups. It's just easier and less work to mock it up over a colored photo.


For example, I take the larger image samples off of Bodeck and Rhodes website in a few colors needed and create those same mock ups you see that people sell with shadows and highlights so they can change the garment color to whatever they need. All I do is mask out the garment, copy and past into channels then copy two. Adjust to burn out the highlights to keep the shadows and the other to do the opposite to keep the highlights. The shadow would be set in layers to multiply and adjust eh opacity...and the highlight to either white or some other layer feature that compliments for highlights. Then drop my art on top. One thing I like to do is mock the art up close to or literally actual size according to the dimensions of the garment that it would print on. Anything too large to me would be miss leading or false representation. Kind of a thing that bugs me but some times I do just drop it on close if in a hurry.

Navigation

[0] Message Index

[#] Next page