screen printing > Newbie

Its time to tackle Hoodies, advice needed..

<< < (2/2)

Donnie:
Make sure you stir the SH!T out of your ink before you start especially if it is cool in your shop.

alan802:
I would say the biggest different is off contact and we usually have to increase printhead air pressure by a good 25% or more, meaning if we print with 25psi through a 110 on cotton tees, to completely clear the screen with one stroke we'll be up around 35psi on hoodies.

mjrprint:
Slow your print speed down enough to clear the screen. Use web tac. If printing an underbase we usually go with a harder durometer squeegee and then something like 60-70 for the rest. Set you off contact properly also.

Navigation

[0] Message Index

[*] Previous page