Author Topic: Epson 4800 Error 0001001B  (Read 5246 times)

Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Epson 4800 Error 0001001B
« on: October 12, 2015, 06:18:49 PM »
Our trusty 4800 is shutting down a lot lately with error 0001001B.  Starting this morning it errors out almost immediately after beginning printing. 

Anyone dealt with this before?  Googling around it looks like it could be connections but the service manual is showing to just replace the head.  We have a backup complete 4800 that I'll sub in but wondering if anyone had fixed this without head replacement.  The head is printing just fine.

Thanks in advance.


Offline ebscreen

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4281
Re: Epson 4800 Error 0001001B
« Reply #1 on: October 12, 2015, 07:57:34 PM »
Had it once and it was a loose ribbon cable.
Check that ink isn't being sprayed on either connection as well.

Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Re: Epson 4800 Error 0001001B
« Reply #2 on: October 12, 2015, 08:16:13 PM »
Fingers crossed, thx.  Just popping 'er open now and it's a little inky in thar....

Offline Alex M

  • !!!
  • Sr. Member
  • ****
  • Posts: 257
Re: Epson 4800 Error 0001001B
« Reply #3 on: October 12, 2015, 09:20:14 PM »
That means the head is over heating.
Can be loose cable or head is just dieing.
Alex Mammoser
Director of Sales
Easiway Systems
Mobile: +1 630 220 6588
alex@easiway.com

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7862
Re: Epson 4800 Error 0001001B
« Reply #4 on: October 13, 2015, 08:15:22 AM »
or your having ink starvation issues. check to make sure your inks are full and if it's a bulk system that the breather caps are off.

Offline Alex M

  • !!!
  • Sr. Member
  • ****
  • Posts: 257
Re: Epson 4800 Error 0001001B
« Reply #5 on: October 13, 2015, 10:19:22 AM »
That could be it ^
Basically it means the thermistor is overheating and those printers use ink to cool the head
Alex Mammoser
Director of Sales
Easiway Systems
Mobile: +1 630 220 6588
alex@easiway.com

Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Re: Epson 4800 Error 0001001B
« Reply #6 on: October 15, 2015, 01:04:46 PM »
Well I tore it apart, checked ever connection and still got the error.  Swapped the small fan on the main board out from another printer and it appears to be running fine now...weird because both fans are functional.   

Seems to be printing without error from FM, switched over from AR.

For reference, here's what the field repair guide says about this error:

Stylus Pro 4880 Field Repair Guide
1/17/08
The following list represents the historical causes for the 0001001B error.
   •   Re-seat the Print Head Cables on the Board side. 

   •   Re-seat the Print Head Cables on the Print Head side. 

   •   Replace the Print Head Cables. 

   •   Replace the Main Board. 

   •   Replace the Print Head. 

0001001B
Note: The 0001001B error code indicates that the Print Head Driver thermistor detects an abnormal temperature.

Good call Alex M. 

Offline sportsshoppe

  • !!!
  • Hero Member
  • *****
  • Posts: 649
  • A way of life.
Re: Epson 4800 Error 0001001B
« Reply #7 on: October 16, 2015, 01:26:19 PM »
As a matter of fact just had the same problem a few weeks back, ended up my cartridges were plugged at top so no air would let ink get through... So I fixed that and it started again after printing some big ink designs. I took 50:50 Simple green and distilled water and put it on shop towel (blue ones from auto parts house) no lint and turned printer off and released head and placed head over towel overnight. So far not a problem after that. I figured some of the print head ports were not flowing freely so that would make the temp go up and set the error code off. I spent hours on computer and that seemed to work for me. Good luck

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7862
Re: Epson 4800 Error 0001001B
« Reply #8 on: October 16, 2015, 02:44:02 PM »
It wasn't good luck, it was my dumb ass forgetting to tell you to unplug those before you left.

Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Re: Epson 4800 Error 0001001B
« Reply #9 on: October 16, 2015, 03:08:37 PM »
Error popped back up last night at 11:30pm when I was in here trying to catch up.  yay.

I'll try the print head unclog thing sportshoppe, thanks.  Problem is I have clean nozzles checks, the only ink running is Chromaline black cart, swapped fresh after the problem started, and all other carts are cleaning solution.  The head is really printing well I'm struggling to believe the head is dying but running out of areas to look.  I just popped all the little air valves off the carts just to see if that helps but I'm seeing fluid in all the lines. 

At this point I have:

printer #1 printing clean but errors  0001001B. 

printer #2 no errors, but prints "dirty", has trailing dots and "fur" around fine details that don't go away at any rip setting or for any amount of head cleaning.  Appears to me like signs of a bad head that I've seen before but I'm confused b/c this 4800 was cherry, bought local and very obviously well maintained so I can't figure what's going on there.  Is there some way to literally clean a print head, i.e., not pump massive fluid through but actually clean off the head to remove anything that could be on there?

All I can think to do now is put the good #1 head into the #2 chassis.   Less work than swapping boards and cables, etc. 

If that doesn't work I'm boned here.  Trolling daily for used 4800/80 to bring in for a new head but does anyone know where to buy a DX5 head that isn't $900? 


Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Re: Epson 4800 Error 0001001B
« Reply #10 on: October 16, 2015, 03:12:57 PM »
I could be COMPLETELY off here but on my WF1100, I have pulled out the head and was able to pump (technically pull) fluids through with a syringe.

Ross Harding and inkjetcarts.us has a video on how this is done.

Again, I have no idea if that is possible are smart for a 4800 but it can be done with the lesser machines like an 1100.

Offline ebscreen

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4281
Re: Epson 4800 Error 0001001B
« Reply #11 on: October 16, 2015, 03:23:05 PM »
There's a section in one of the maintenance menus (hold three buttons down while turning on) where it will read the current head temp.
I'd go there and then wiggle things while watching for jumps.

I have a few DX5's upstairs I believe, only the leftmost (photo?) black channel works. You can have one if need be.

When installing new heads you have to input the head rank in the firmware, has to do with voltage and the temp
the head should run at.

Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Re: Epson 4800 Error 0001001B
« Reply #12 on: October 16, 2015, 03:26:45 PM »
There's a section in one of the maintenance menus (hold three buttons down while turning on) where it will read the current head temp.
I'd go there and then wiggle things while watching for jumps.

I have a few DX5's upstairs I believe, only the leftmost (photo?) black channel works. You can have one if need be.

When installing new heads you have to input the head rank in the firmware, has to do with voltage and the temp
the head should run at.

That would be rad, all I need is photo black.   

I don't remember doing the rank on the last head install I did for some reason, the field repair manual has instructions but I don't have the software to do it.  Can it be done from the maint menu on the unit? 

Offline ebscreen

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4281
Re: Epson 4800 Error 0001001B
« Reply #13 on: October 16, 2015, 03:49:25 PM »
Nope, you need a special program to do it. I think I have it. I don't think it's critical for what we print though.

Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Re: Epson 4800 Error 0001001B
« Reply #14 on: October 16, 2015, 05:19:33 PM »
That would make sense.  I think I just did a head alignment after swapping.