Opportunity is missed by most people because it is dressed in overalls and looks like work. - Thomas Edison
It is a single part ready to use emulsion. Fast exposure works pretty well.
We have been using it for a few months now. We've done one order which was 400 shirts 2 color discharge front and back and the screens held up fine. A bunch other smaller orders with waterbase and discharge with no problem. I haven't completely dialed in our exposure times with it yet but we've done a few 4CP orders and a few Sim Process orders and the halftones exposed fine. We are a Manual print shop, so we are not exactly at the highest end of precision and volume ... but it's been working well for us.
Quote from: Maff on August 12, 2015, 11:52:51 AMWe have been using it for a few months now. We've done one order which was 400 shirts 2 color discharge front and back and the screens held up fine. A bunch other smaller orders with waterbase and discharge with no problem. I haven't completely dialed in our exposure times with it yet but we've done a few 4CP orders and a few Sim Process orders and the halftones exposed fine. We are a Manual print shop, so we are not exactly at the highest end of precision and volume ... but it's been working well for us.Would you mind giving me an idea about exposure times please.Chromaline were so forthcoming not to include any guidlines on the Mfd.
Is Step Wedge Man making an appearance?
About 40 Seconds for 110T. I have a 850W MH Nuarc exposure unit. I coat 1/1 round side. I changed my bulb a few weeks ago and haven't yet dialed in the higher mesh.
Quote from: Maff on September 10, 2015, 02:50:47 PMAbout 40 Seconds for 110T. I have a 850W MH Nuarc exposure unit. I coat 1/1 round side. I changed my bulb a few weeks ago and haven't yet dialed in the higher mesh.Thanks a lot man. I`ve to say though that this emulsion is pretty tacky.