« previous next »
Pages: [1]   Go Down

Author Topic: AC Heads  (Read 828 times)

Offline shaneds

  • Verified/Junior
  • **
  • Posts: 47
AC Heads
« on: July 28, 2015, 04:09:29 PM »
I recently got a Challenger II that has AC Heads and the Simon controller inside the head is falling down so you are unable to see the numbers. From what I've heard this is pretty common where the plastic holders break off. How do you guys reattach these so they stay in the correct position? Double side tape is not wanting to cooperate...

Logged

Offline CGS

  • Verified/Junior
  • **
  • Posts: 84
Re: AC Heads
« Reply #1 on: July 28, 2015, 05:44:38 PM »
35 mm DIN rail, two button head cap screws mount the rail to the back of the control box. The back of the Siemens drives already have the cutout for these, slide the clip up and lock it in place.
Logged

Offline shaneds

  • Verified/Junior
  • **
  • Posts: 47
Re: AC Heads
« Reply #2 on: July 28, 2015, 08:37:05 PM »
awesome thank you
Logged
Pages: [1]   Go Up
« previous next »