« previous next »
Pages: [1]   Go Down

Author Topic: What ink jet do you use?  (Read 1669 times)

Offline sportsshoppe

  • !!!
  • Hero Member
  • *****
  • Posts: 649
  • A way of life.
What ink jet do you use?
« on: July 23, 2015, 10:07:48 AM »
Well my Epson died and looking at a replacement..... looking for suggestions and feed back
Thanks
Logged

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7862
Re: What ink jet do you use?
« Reply #1 on: July 23, 2015, 10:26:19 AM »
i've got a 4900 with a bulk system(but I use carts from accuink) 1 roll of 13" film and another partial on the machine with Filmaker v3 I'd sell for $500.  It was rebuilt 2 years ago.

You will probably have to pay Filmaker $75 in support fees to activate the software on a different computer.
Logged

Offline sportsshoppe

  • !!!
  • Hero Member
  • *****
  • Posts: 649
  • A way of life.
Re: What ink jet do you use?
« Reply #2 on: July 23, 2015, 11:03:29 AM »
What is the maximum width of the print?MK
Logged

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7862
Re: What ink jet do you use?
« Reply #3 on: July 23, 2015, 11:08:14 AM »
i think 17", at least that is the film size I've used before.  for us 13" covered almost everything.
Logged

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7862
Re: What ink jet do you use?
« Reply #4 on: July 23, 2015, 11:15:54 AM »
it's a 4800, my bad.  Not sure what a difference that makes.
Logged

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: What ink jet do you use?
« Reply #5 on: July 23, 2015, 11:47:12 AM »
Quote from: mk162 on July 23, 2015, 11:15:54 AM
it's a 4800, my bad.  Not sure what a difference that makes.

Supposed to be a good difference. According to posts here, the 4900 was not an improvement!
Logged
That rug really tied the room together, did it not?
Pages: [1]   Go Up
« previous next »