« previous next »
Pages: [1]   Go Down

Author Topic: Need a FLOCKING printer  (Read 1304 times)

Offline Dottonedan

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 5912
  • Email me at art@designsbydottone.com
Need a FLOCKING printer
« on: October 10, 2011, 05:07:11 PM »
Anyone here print designs using flocking and are stocked with some supplies to take on a small project?
Logged
Artist & high end separator, Owner of The Vinyl Hub, Owner of Dot-Tone-Designs, Past M&R Digital tech installer for I-Image machines. Over 35 yrs in the apparel industry. e-mail art@designsbydottone.com

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6368
Re: Need a FLOCKING printer
« Reply #1 on: October 10, 2011, 05:40:46 PM »
how small? With flocking paper just about anybody should be able to do it.

pierre
Logged
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline virgil427

  • Full Member
  • ***
  • Posts: 111
Re: Need a FLOCKING printer
« Reply #2 on: October 10, 2011, 07:40:59 PM »
The last co. I worked for flocked the disney posters
Logged

Offline screenxpress

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2434
Re: Need a FLOCKING printer
« Reply #3 on: October 10, 2011, 10:43:12 PM »
Ohhhhhhhhhhhhhhhhhhhh.  That kind of flocking printer.   ;D
Logged
Anything important is never left to the vote of the people. We only get to vote on some man; we never get to vote on what he is to do.  Will Rogers

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5694
Re: Need a FLOCKING printer
« Reply #4 on: October 11, 2011, 06:41:21 AM »
I believe what Dan is referring to is an inline flocking project. This is difficult but not impossible to accomplish with flock transfer paper. The non flocked areas should be discharged or plasticharge colors. I wrote about this in Printwear ys ago where I made my own adhesive with the crystals, HD clear, and a little puff additive. 200 micron stencil for extra loft. Also an air operated transfer machine with a pressure gauge and height adjustment is advised in order to achieve acceptable and consistent results. Definitely wash test for adhesion. This is a project for someone who has a reasonable amount of experience with it based on the images Dan sent me. Nice graphics. Best of luck with your search DD I'll ask around.
tp
Logged
Pages: [1]   Go Up
« previous next »