Anatol Solutions Dryer

[willy35]

Hi,

Is there someone on the board that use the latest Antol solutions dryer ?

I would like to get some feedbacks from real users.

Cheers

Willy

[Donnie]

I have an electric solutions. It's 10 years old so I'm not sure if my response qualifies.... I can tell you this, I have worked on my dryer more than my Anatol Press. I've replaced 4 relays in 10 years. I can not say whether or not that is problematic for a 10 year old press.

[3Deep]

Donnie I think it might just be a problem with bad relays if that's all you've had to change, I got a older dryer from another high profile company and have had to replace fuse's and relays, mostly fuse's.

[cclaud3]

I have a forced air 38" belt model that's 6.5 months old. Just had to change the speed controller assembly last week. Dryer was still functioning but the numbers were jumping all over the place on the speed readout...I think it was jumping so fast that the temp on the shirts probably wasn't being effected. The wiring is very neat and orderly but I had to pull almost all of the harnesses/wires out to change the controller!

The dryer achieves temp very fast and appears to hold it pretty well. It's also insulated pretty well. No where near as hot around it as another brand's dryer was that I had previously.
They could filter the cabinet better, you really got to keep it vacuumed regularly as theres just some air slots underneath the control panel box for airflow.